JVC LX-P1010ZE, LX-P1010ZU Button Adjustment Details Remarks, Position, Dot Clock, Phase

Page 46

Adjusting the Image Position, Dot Clock and Phase

Depending on the adjustment item, the adjust procedure and adjustment will vary. Please refer to the chart below.

	Adjustment		Button	Adjustment Details	Remarks
	item		Button	Adjustment Details	Remarks
	item

			Press	The image moves to the right.
			Button.	The image moves to the right.
			Button.
	H Position
	H Position		Press	The image moves to the left.
			Press	The image moves to the left.
			Button.

			Press	The image moves up.
			Button.	The image moves up.
			Button.
	V Position
	V Position		Press	The image moves down.
			Press
			Button.
			Button.

	Dot Clock		Adjust the personal computer’s dot clock and		RGB,
	Dot Clock		the projector’s dot clock so that no bit interfer-		YPBPR
			ence (vertical stripes) appears on the screen.		only

	Phase		Adjust in order to remove any picture interfer-		RGB
			ence or contour blurring which may occur in		RGB
			ence or contour blurring which may occur in		only
			computer images.		only
			computer images.

Previous	46
screen

Image 46

Contents Operating Instructions Model No. LX-P1010ZU LX-P1010ZE Dear JVC Customer Things You Should KnowDeclaration of Conformity USA only Important Safeguards Important Safeguards Important Safeguards Important Safeguards Important Safeguards For Your SAFETY, Please Read the Following Text Carefully Important the Moulded Plug U.K. onlyFuse One-touch Auto Setup LCD Projector FeaturesCompact & Lightweight Built-in Simple StandAutomatic Universal Power Supply Digital Zoom and Freeze FeatureCD-ROM Manual Frontal Air Vent Design Image Quality Select Feature, R/G/B Level Adjust FeatureEquipped with a variety of convenient functions Contents of LCD Projector Box LCD Projector Product InformationBack and bottom LCD Projector Control panel LCD Projector Connector panel RGB/YPBPR Audio VideoRemote Control unit Before using the Remote Control Unit Replacing the batteryOperating range Attaching and Removing the Swivel Stand System Configuration Example Example of connection to audio-visual equipmentExample of connection to a Personal Computer Connecting D-sub15-BNC5 female Adaptor Cable BNC-RCA AdaptorSystem Configuration Example Setting-up Positions Refer to screen size and required distanceFront projection Rear projectionScreen size and required distance LCD Projector /Screen Relative Position Chart Turning the power on and off Turning off the power Turning on the powerWait for the cooling fan to stop Adjusting the Lens Press the Menu Button Menu operationsPress the or Returning to the previous screen Changing the Projection Mode Press Menu to display the menuPress Menu to display the menu Press or to Setting the Screen TypeThen Enter to Changing to 169 wide screen format Explanation of Screen Type Changing the input signal Changing the input signal Adjusting the LCD Projector projection angle Using the swivel standBasic LCD Projector Operation Adjusting the VolumeFreezing the picture Black screen Using the Auto Setup Feature Press the Auto Setup ButtonAdjusting the Image Position, Dot Clock and Phase Or toPosition Button Adjustment Details RemarksPhase Dot ClockSelecting the Image Quality Press or to select Image Quality Or toAdjusting the Picture to the Desired Setting Press or to select Color Press or to adjust the colorTint Adjustment Button Adjustment Details RemarksColor BrightnessAdjusting the White Balance Press or to selectAdjustment Button Adjustment Details LevelSetting of the RGB/YPBPR Input Signal Selection Press or to change the input signalTurning off the input signal display Auto Lamp Off Canceling enlarging scanning line conversion function Press or to select ExpansionKeystone correction function Press the Keystone ButtonScreen Projected pictures Selecting the Language for On-Screen Displays Press or to select languageInformation Functions Press Enter to display the screenDisplay Item Description Remarks No. of Dots Digital Zoom Functions Volume Status Code Display Indications Symptom Problem Possible Solution Air Filter Cleaning the Air FilterSet the Power Button to OFF and unplug the power cord Remove the Air Filter unitClean the Filter Lamp Replacement To retailers Lamp replacement periodCase lamp time reaches 2 000 hours Signals that can be Input Inputtable computer input signal RGBNo. of dots frequency Frequency frequency KHz MHz Inputtable component signal Ypbpr SignalsInputtable S-VIDEO/VIDEO signal VIDEO/VIDEO Signal Format Selection Blue Black Screen with No Input Signal Specifications PAL/SECAM/NTSC/PAL-M/PAL-N/NTSC4.43Specifications and design subject to change without notice Before Requesting Service Problem Possible CauseAudio signal source may not be connected Previous screen