JVC LX-P1010ZU, LX-P1010ZE Specifications, PAL/SECAM/NTSC/PAL-M/PAL-N/NTSC4.43

Specifications

LCD panels		0.7″ Poly silicon LCD panel X 3,
		RGB shutter method, using Translucent TN crystal panels
Drive method		Active Matrix 4:3 Aspect Ratio panels, TFT (Thin Film
		Transistor)
No. of pixels		480 000 (800 X 600) stripe pixels X 3 panels
Projection lens		1-1.3 zoom lens, F2.3-2.6, f28 mm- 37 mm Manual Focus
Projector lamp		130 W UHM Lamp
Contrast ratio		300 : 1
Brightness		700 lumen / ANSI
No. of colours		16 777 216
Screen size		30″ - 300″
Projection (throw) distance		1.6 m - 15.7 m
Lens axis shift		6:1 Low position
Color systems		PAL/SECAM/NTSC/PAL-M/PAL-N/NTSC4.43
Video input signal		1 V [p-p], sync negative, 75 Ω terminated
S-Video input signal		Y (luminance signal) : 1 V [p-p], sync negative, 75 Ω
		terminated
		C (chrominance signal) : burst 0.286 V [p-p], 75 Ω
		terminated
Audio input signal		0.32 V [rms]
Audio out		0.5 W Mono
		RGB Analog (0.7 V [p-p], 1.0 V [p-p] with sync on green,
	Video signal	75 Ω)
		Ω
		YPBPR (Y: 1.0 V [p-p], PB, PR: 0.7 V [p-p], 75 )
RGB/YPBPR
input signal
	Sync signal	H/V separate, H/V composite, or Sync-on-Green
	H-Frequency	24 KHz - 80 KHz (TTL Level)
	V-Frequency	50 Hz - 86 Hz (TTL Level)
Connectors		S-Video Input: Mini Din 4-pin X 1
		Video Input : RCA pin X 1
		Audio Input: M3 stereo mini pin X 1
		Serial Port (RS-232C): Mini Din 8-pin X 1
		RGB/YPBPR Input: D-Sub mini 15-pin X 1

Previous screen

Continued on the next page... 75