JVC DLA-SX21U What to do when these messages are displayed, Press any key to delete the message

What to do when these messages are displayed

Message Cause (Contents)

When the “Lamp time” reaches 1000 hours

[A message indicating “1000 h” appears on the projected screen.

1000h	• Press any key to delete the message.
	EXIT

When the accumulated lamp time reaches between 1900 hours to 2000 hours, this message appears on the screen each time the projector is turned on.

Lamp replacement[ Press any button to delete the message.

Prepare a replacement lamp and install as quickly as possible.

EXIT

Lamp replacement

WARNING

The word “Warning” appears and blinks when the accumulated lamp time reaches 2000 hours.

The message can be cleared by pressing the EXIT button. However, the same message will re-appear every hour.

Once the projector is turned off, it cannot be turned on again if the accumu-

EXITlated lamp time has exceeded 2000 hours.

When the accumulated lamp time reaches 2010 hours, the projector shuts down and cannot be turned on again.

[Replace the light-source lamp and reset the “Lamp time”. (☞ page 43, 45)

Note

•The message display language corresponds to the menu language setting. This is set to “English” when the projector is bought. The dis- play language can be selected from among 8 languages. (☞ page 39) However, the input mode (PC1,PC2, PC3, Y/C, VIDEO) and button indications (FREEZE, D.ZOOM, EXIT) are only displayed in English irrespective of the display language setting.

50