LAN connections | Wireless LAN |
\Wirelss Connections, Single VTR to Single Client PC
* Do not perform encryption of the wireless LAN.
Set a unique number to avoid doubling
DHCP | OFF |
|
|
WLAN AD HOC MODE | ON |
|
|
WLAN ESS ID | abcdef | PROXY SERVER | OFF |
WLAN CH | 2 | DHCP SERVER | OFF |
IP ADDRESS | 192. 168. 100. 101 | IP ADDRESS | 192. 168. 100. 100 |
SUBNET MASK | 255. 255. 255. 000 | SUBNET MASK | 255. 255. 255. 000 |
Set the same domain
Wireless LAN settings of Client PC
NetworkType | 802. 11 Ad Hoc Mode |
ESS ID | abcdef |
Channel | 2 |
Encryption Mode | Open System |
* For the PC settings when using a LAN card, refer to the instruction manual included with the LAN card.
NOTE
Refer to the appropriate manual for setting the PC LAN card
Perform the following settings for the above configuration.
●DHCP must be OFF.
●VTR and Client PC are set the same domain and different IP addresses.
●The Netmask of both the VTR and Client PC must be the same
●If the WLAN card in the PC is set to 802. 11 ADHOC, set the WAN AD HOC MODE to IBSS. If the WLAN card in the PC is set to ADHOC, set the WLAN AD HOC MODE to AHDM.
●The WLAN ESS ID on both the
●The
●If WEP data encryption is used, the same key must be used in the
●Set the network connection of the Client PC to use no proxy server. Please refer to Page 27. Setting a Proxy Server for information regarding this setting if troubles are encountered.
LAN connections | Wireless LAN |
\Wireless Connections, Multiple VTR to Single Client PC
DHCP | OFF |
| DHCP | OFF |
| |
WLAN AD HOC MODE | OFF |
| WLAN AD HOC MODE | OFF |
| |
WLAN ESS ID | abcdef |
| WLAN ESS ID | abcdef |
| |
WLAN CH | 2 |
| WLAN CH | 2 |
| |
IP ADDRESS | 192. 168. 100. 102 |
| IP ADDRESS | 192. 168. 100. 101 |
| |
SUBNET MASK | 255. 255. 255. 000 |
| SUBNET MASK | 255. 255. 255. 000 |
| |
|
|
|
| |||
|
| STATION |
|
| ||
|
| ESS ID abcdef |
|
| ||
| Encryption Mode | Open System |
|
| ||
|
|
| PROXY SERVER | NO USE | ||
|
|
|
| DHCP SERVER | NO USE | |
DHCP | OFF |
|
| IP ADDRESS | 192. 168. 100. 100 | |
WLAN AD HOC MODE | OFF |
|
| SUBNET MASK | 255. 255. 255. 000 | |
WLAN ESS ID | abcdef |
|
|
|
| |
WLAN CH | 2 |
|
| Wireless LAN settings of Client PC | ||
|
|
|
| NetworkType | Infrastructure | |
IP ADDRESS | 192. 168. 100. 103 |
|
| ESS ID | abcdef | |
SUBNET MASK | 255. 255. 255. 000 | Channel | 2 | |||
|
| |||||
|
| DHCP | OFF | Encryption Mode | Open System | |
|
|
|
| |||
|
| WLAN AD HOC MODE OFF | * For the PC settings when using a LAN card, | |||
Network Type (Ad Hoc/Infrastructure) | WLAN ESS ID | abcdef | ||||
refer to the instruction manual included with | ||||||
Make sure ESS ID and Channel settings | WLAN CH | 2 | the LAN card. |
| ||
are the same. |
| IP ADDRESS | 192. 168. 100. 104 |
|
| |
|
|
|
| |||
Set a unique number to avoid doubling | SUBNET MASK | 255. 255. 255. 000 |
|
| ||
IP ADDRESS | 192. 168. 100. XXX |
|
|
|
| |
SUBNET MASK | 255. 255. 255. 000 |
|
|
|
| |
Set the same domain
NOTE
Refer to the appropriate manual for setting the PC LAN card
Perform the following settings for the above configuration.
●DHCP should be OFF4.
●VTR and Client PC are set the same domain and different IP addresses.
●The Netmask of all the VTR and the Client PC must be the same.
●The WLAN AD HOC MODE must be set OFF.
●The PC WLAN card must be set to Infrastructure mode.
●The WLAN ESS ID must be the same in the access point and all VTR. The VTR default ESS ID is ‘NONE’.
●The WLAN channel must be the same for the PC, the access point and all VTR.
●If WEP data encryption is used, the same key must be used on the PC, the access point, and all VTR. The PC encryption mode must be set to ‘Open System’.
●If the computer is located remotely and accessing the VTR through the Internet, the Infrastructure must allow through access to the VTR. Consult your IT department.
●Set the network connection of the Client PC to use no proxy server. Please refer to Page 27 for information regarding this setting if troubles are encountered.
4In case the connecting Client PC is not a server equipped with a DHCP feature.
24 | 25 |