LAN connections | Wireless LAN |
\Wireless Connections, Multiple Client PC to a Single VTR
DHCP | OFF | DHCP | OFF |
WLAN AD HOC MODE | OFF | WLAN AD HOC MODE | OFF |
WLAN ESS ID | abcdef | WLAN ESS ID | abcdef |
WLAN CH | 2 | WLAN CH | 2 |
IP ADDRESS | 192. 168. 100. 102 | IP ADDRESS | 192. 168. 100. 101 |
SUBNET MASK | 255. 255. 255. 000 | SUBNET MASK | 255. 255. 255. 000 |
|
|
| STATION |
|
|
|
|
|
| ESS ID abcdef |
|
|
|
|
| Encryption Mode Open System |
|
| ||
|
|
|
|
|
| |
|
|
|
|
| PROXY SERVER | NO USE |
|
|
|
|
| DHCP SERVER | NO USE |
|
|
|
|
| IP ADDRESS | 192. 168. 100. 100 |
DHCP | OFF |
|
|
| SUBNET MASK | 255. 255. 255. 000 |
WLAN AD HOC MODE | OFF |
|
|
|
|
|
WLAN ESS ID | abcdef |
|
|
| PC wireless LAN driver settings | |
WLAN CH | 2 |
|
|
| NetworkType | Infrastructure |
|
|
|
|
| ESS ID | abcdef |
IP ADDRESS | 192. 168. 100. 103 |
|
|
| Channel | 2 |
SUBNET MASK | 255. 255. 255. 000 |
|
|
| Encryption Mode | Open System |
|
|
| DHCP | OFF | * For the PC settings when using a LAN card, | |
|
|
| WLAN AD HOC MODE | OFF | ||
Network Type (Ad Hoc/Infrastructure) |
| refer to the instruction manual included with | ||||
| WLAN ESS ID | abcdef | the LAN card. |
| ||
Make sure ESS ID and Channel settings |
| |||||
WLAN CH | 2 |
|
| |||
are the same. |
|
|
|
| ||
|
|
|
|
|
| |
Set a unique number to avoid doubling |
| IP ADDRESS | 192. 168. 100. 104 |
|
| |
| SUBNET MASK | 255. 255. 255. 000 |
|
| ||
|
|
|
|
| ||
IP ADDRESS | 192. 168. 100. XXX |
|
|
|
|
|
SUBNET MASK | 255. 255. 255. 000 |
|
|
|
|
|
Set the same domain
A total of 10 clients can connect simultaneously, clients can be using Streamproducer and Windows media player to view the VTR’s output.
Configure the VTR as follows:
●DHCP must be OFF.
●The WLAN AD HOC Mode must be OFF.
●The WLAN ESS ID, WLAN CH, and WEP encryption key must match the access point
●If clients will be connecting through an Intranet or the Internet, consult you IT department and request a IP address for the VTR.
●VTR and Client PC are set the same domain and different IP addresses.
LAN connections | Proxy Settings |
It is necessary to select whether to use a proxy server or not depending on the network environment.
To determine if you are using a proxy server.
1.
2.
3. From the ‘Connections’ window, click on the ‘LAN Settings’ button.
4. If ‘Use a proxy server’ is checked in the window that opens, then you use a proxy server to access the Internet.
●If this is not checked, then you don’t use a proxy server, and your configuration is complete.
5.Click on the ‘Advanced’ button.
6.In the ‘Exceptions’ box of the window that opens, enter the first portion of the VTR IP address followed by.‘*.*’ For ex- ample, the IP address of a VTR may be 192.168.100.101, so 192.168.*.* has been entered
7.Click ‘OK’ in all open windows.
26 | 27 |