CONTROLS AND FEATURES (cont’d)
REAR VIEW
<Rear Panel>
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL)
COMPONENT/RGB INPUT CARD (OPTIONAL:
1 Video input/output terminals
Input (IN) and output (OUT) terminals for component (color deference) or RGB signals.
To AC outlet (120 V AC, 50 Hz/60 Hz)
To AC outlet (230 V AC, 50 Hz/60 Hz)
25
For U.S.A. and Canada
25
For Europe
25
For the United Kingdom
24
(Rear view of
23
G / Y
INOUT
B/P
INOUT
R/P
INOUT
HD/C S
INOUT
VD
INOUT
AUDIO
IN OUT
1
2
3
4
The IN and OUT terminals are
Select component signal : press INPUT SELECT C button
Select RGB signal | : press INPUT SELECT D button |
2 Synchronized signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronized signals.
External sync is available with RGB input only. The IN and OUT terminals are
(When no cable is connected to the OUT terminal, the input signal is automatically terminated.)
G on SYNC cannot be used with RGB input.
3 Audio input/output terminals
Input (IN) and output (OUT) terminals for audio signals.
The IN and OUT terminals are
4 Connection terminal (to a Color Video Monitor)
Attach to the connection terminal of your color video monitor.
ENGLISH
No.51961
23 Main power switch
Press the switch to turn the main power ON or OFF. When the main power is ON, the power indicator on the front panel lights in orange and the monitor enters the
I : ON : OFF
24 AC inlet [AC IN]
Power input connector. Connect the provided AC power
cord t to an AC outlet (120 V AC or 230 V AC, 50 Hz/60 Hz).
25 Power cord
Connects the provided power cord (120 V AC or | r. |
230 V AC, 50 Hz/60 Hz) to the AC IN connector | |
Caution: |
|
In North America (USA and Canada), this monitor comes |
|
with one power cable. In Europe and the United Kingdom, |
|
two power cables are provided (one for use in continental |
|
European countries and the other for the UK). Be sure to |
|
use the power cable that is appropriate for the AC outlets |
|
used in your region. If none of the power cables provided |
|
SDI INPUT CARD (OPTIONAL: IF-C01SDG)
1 Output terminal for a selected component serial digital signal
is suitable, please contact your dealer or qualified service |
personnel to obtain the correct type of power cable. |
SWITCHED |
|
OUT |
|
IN | SDI 1 |
IN | SDI 2 |
AUDIO1 |
|
IN | OUT |
AUDIO2
Note:
1
2
3
4
Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated.
NOTE: When the monitor’s main power is OFF, no digital signal is output.
In the standby mode, the signal from the SDI 1 terminal is output.
2 Input terminals for component serial digital signals
Input terminals for the digital signal.
Select SDI 1 : press INPUT SELECT C button
Select SDI 2 : press INPUT SELECT D button
3 Audio input/output terminals
Input (IN) and output (OUT) terminals for the analog signals corresponding to SDI 1 and SDI 2.
NOTE: This input card cannot decode audio data even if contained in the input digital signal.
●The optional input cards shown below cannot be used.
Using any of these cards will void your warranty and may result in damage or malfunction.
*Video input card
4 Connection terminal (to a Color Video Monitor)
Attach to the connection terminal of your color video monitor.
6 | 7 |