Button Functions
Return +
The return+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.
RETURN+ and hold for three seconds
RETURN CHANNEL
PROGRAMMED !
The channel currently active has been programmed as your return+ channel. Now scan through
the channels using the CHANNEL+/– buttons.
RETURN+
You will return to your programmed channel.
•To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The message “RETURN CHANNEL CANCELLED!” will appear.
•Return+ works only with the Channel+/– buttons. Pressing any number key will cancel return+.
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7:
0 (Zero)
7 (Seven)
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to recieve.
Volume +/–
Use these buttons to raise or lower the TV’s volume level.
100+ Button
Use the 100+ button to directly access channels above channel 99. For example, to move to channel 124, press 100+, 2 (Two), 4 (Four).
37