Picture Adjust
Set Video Status
With Set Video Status, you can save your own set of picture quality adjustments as “Choice” and have access to them at the touch of a button.
Press the MENU button
π† To SET VIDEO STATUS √® To operate
√® To set the TINT levels π† To move to the next option
Repeat these steps until all levels are set.
π† To SAVE AS CHOICE √® To save settings and exit
������� ���������������������������
������� ���������������������������
��������� ���������������������������
�������� ���������������������������
�������� ���������������������������
��������������
��������������
���������� ��������������
•You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your preferences will not be saved.
•You can access your “Choice” settings at any time by pressing the VIDEO STATUS button on the remote control.
Note:
The setting screen will disappear if you do not make any adjustments or move to the next setting in approximately three seconds. Any changes you have made to picture settings up to that point will be stored. You can exit the Picture Settings menu at any time by pressing the EXIT button on the remote control.
28