CONTROLS AND FEATURES
FRONT VIEW
REAR VIEW
<Front Panel>
<Rear Panel>
12 
VIDEO A
REMOTE
10 | CHROMA CONTRAST | VOLUME/SELECT |
|
| |
0C | PHASE BRIGHT |
|
1 | 2 | 3 |
1 Chroma/Phase button
[
CHROMA/
PHASE]
Press this button to activate the picture color density adjustment mode or picture hue adjustment mode. Each time you press the button, the adjustment item changes.
Picture color density f Picture hue
MENU | UNDER | A | B | POWER |
| SCAN |
|
INPUT SELECT
4 | 5 | 6 | 7 | 8 | 9 |
6 Input A (VIDEO) button [INPUT SELECT A]
Selects the video and audio signals input to the VIDEO A
@and AUDIO A % terminals on the rear panel. The button lights when selected.
7 Input B (VIDEO Y/C) button [INPUT SELECT B]
Selects the video and audio signals input to the VIDEO B
13 
14 
15 
16 
INOUT
VIDEO B
INOUT
INY/C
OUT
AUDIO A
INOUT
AUDIO B
INOUT
11
VIDEO A
VIDEO B
Y/C
AUDIO A
AUDIO B
No.51922
Adjust the value with the VOLUME/SELECT buttons 3. Also used as a control button in the menu function mode.
2 Contrast/Brightness button
[CONTRAST 
/ BRIGHT 
]
Press this button to activate the picture contrast adjust- ment mode or picture brightness adjustment mode. Each time you press the button, the adjustment item changes.
Picture contrast f Picture brightness
Adjust the value with the VOLUME/SELECT buttons 3. Also used as a control button in the menu function mode.
3 Volume/Select buttons [VOLUME/SELECT – 
+]
Adjusts the speaker volume. Also used as a control button in the menu function mode.
4 Menu button [MENU]
Displays and disappears the <MENU> screen. Pressing the CHROMA/PHASE button 1 with the Menu button depressed will display the
5 Under Scan button [UNDER SCAN]
Reduces the screen size to display the entire image. Press the button again to cancel Under Scan. When selected, the Under Scan button lights.
#or VIDEO B (Y/C) $ and AUDIO B ^ terminals on the rear panel. The button lights when selected.
Note:
●The VIDEO B terminals include a video terminal (BNC connector) and a Y/C terminal
8 Power indicator
Unlit : The main power is OFF.
Orange : The main power is ON, but the monitor’s power is OFF (in the
Green : The main power is ON, and the monitor’s power is ON (in the normal operation mode).
9 Power switch [POWER
]
Press the power switch to turn the monitor’s power ON or OFF when the main power is ON.
Note:
●When RUSH DELAY is set to SLOW, it takes about three seconds before power is actually supplied after the power switch is pressed.
10 Speaker
A
11 REMOTE (external control) terminal
Connect this terminal to an external control unit to enable remote operation of the monitor.
Refer to the HOW TO USE EXTERNAL CONTROL on page 15 for more details.
12 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals. The output terminal is
IN : Video signal input terminal
OUT :
Notes:
*For corresponding audio signals, use the AUDIO A terminals %.
*Also refer to BASIC CONNECTION EXAMPLE on page 13.
13 Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals. The output terminal is
IN : Video signal input terminal
OUT :
Notes:
*For corresponding audio signals, use the AUDIO B terminals ^.
*Also refer to BASIC CONNECTION EXAMPLE on page 13.
14 Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]
Y/C
IN :
OUT :
Notes:
*For corresponding audio signals, use the AUDIO B terminals ^.
*When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal has priority.
*Also refer to BASIC CONNECTION EXAMPLE on page 14.
15 Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals @.
The output terminal is
OUT :
Notes:
*For corresponding video signals, use the VIDEO A terminal @.
*Also refer to BASIC CONNECTION EXAMPLE on page 13.
16 Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals # VIDEO B (Y/C) $.
The output terminal is
IN | : Audio signal input terminal |
OUT | : |
Notes:
*For corresponding video signals, use the VIDEO B terminals # or VIDEO B (Y/C) terminals $.
*Also refer to BASIC CONNECTION EXAMPLE on pages 13 and 14.
ENGLISH
4
5