JVC GM-V42C, LCT1616-001A manual Installation, Precautions, When installing the Monitor on a stand

Page 10

Installation

Precautions

•When mounting the Monitor vertically, consult your dealer. (See also page 13.)

•When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending on a particular case. Ask your dealer for installation.

•When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward, or backward.

•Route the power cord and connection cables along wall or floor corners to avoid walking on them.

•For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.

•The ambient temperature of the installation place should be within the range of 0˚C to 40˚C (slightly variable depending on ambient conditions for installation.)

•When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it is free from these effects.

When installing the Monitor on a stand

Front View

 

 

200

150

150

 

50

Side View

50

Unit: mm

Wall

Take measures against the Monitor from overturning:

To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.

For detailed information, refer to the manual supplied for the stand.

When mounting the Monitor on the wall

When hanging the Monitor from the ceiling

Front View

 

Side View

 

200

 

100

 

100

Unit: mm

100

50

 

Side View

200

50

Unit: mm

Notes:

•Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you can use the Refresh function (see page 31).

•The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be aware that only a slight number of pixels may be deficient or lit at all times.

•Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example, if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change the installation place.)

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Plasma Display Monitor GM-V42CINSTRUCTIONS Instructions Safety Precautions Important Information Important SafeguardsPower Connection Remote Control Parts IdentificationMonitor Front View Monitor Rear Views Video in terminal pin jack Video OUT terminal BNCVideo B terminals option Pb, Pr Video input terminals BNCPreparations Checking the AccessoriesInstalling the Batteries Attaching the Ferrite CoreWhen installing the Monitor on a stand InstallationPrecautions When mounting the Monitor on the wallComputer signals Preset Available SignalsVideo signals option ConnectionsConnection Diagrams DVD player, etc Optional connectionsPersonal computer Make terminal Connecting an external control unitConnecting the Cooling Fan Unit not supplied External control unitBasic Operations Daily OperationsChanging the Aspect Ratio Precautions for using the screen mode switching functionPress Aspect to select the screen size Video Adjustments Adjusting the Picture QualityPress 2/3 to adjust the selected item Press 3 to display the Size/Position Adjustment MenuAdjusting the Screen Size and Position Press 5/∞ to move the cursor 3 to SIZE/POSITION ADJBar To make an adjustment while viewing the adjustmentPress 5/∞ to select the Sub Menu you want to adjust Press 5/∞ to move the cursor 3 to sub menuAdjusting the Color Temperature Adjusting the White BalanceTo make an adjustment while viewing the adjustment bars Setting the Receivable Signal Types Press 2/3 to select an aspect ratio you wantSetting the COMPONENT/RGB B Input Press 3 again to reset the adjustments Resetting the Function Selection Menu SettingsPress 5/∞ to move the cursor 3 to reset Changing the Resistance of the RGB B Input TerminalsOther Convenient Functions Showing On-screen DisplayTo cancel the Status Display function, select OFF Showing the On-screen When Changing Input ModePress 2/3 to select the desired setting Confirming the Use Time and Model NameProhibiting the Monitor’s Button Operations To cancel the Control Lock function, select OFFPress 5/∞ to move the cursor 3 to Control Lock Setting the High-Definition Signal Types Setting the Remote-Controllable InputPress 5/∞ to move the cursor 3 to Remote Switch Press 5/∞ to move the cursor 3 to HD Signal ModeSetting the Clock and the Power On/Off Timer Setting the ClockUsing the Power On/Off Timer Using the Pixel Shift FunctionUsing the Power Save Function Press 5/∞ to move the cursor 3 to Power Save on the secondPress 2/3 to select the desired setting Reducing the Afterimage EffectRefreshing the Screen Start TimeChecking the Timer Battery When the battery becomes weak Battery LOWResetting All the Menu Settings Resetting All the Setup Menu SettingsPress 5/∞ to move the cursor 3 to reset on the second Press 5/∞ to move the cursor 3 to all reset on the secondMenu Classifications Main MenuSize Signal ModeBright Color TempTimer Menu Setup MenuWhite Balance Adjustment Menu Reset Confirmation ScreenPage Input Select Video A, Video B TroubleshootingAuto If TEMP. Over flashes in yellow Self-diagnostic IndicationIf TEMP. Over lights in red Specifications General Input/output terminals Model nameTS-C01FANG Options not suppliedTS-C421SPG Pin assignment Specifications for terminals Dimensions
Top Page Image Contents