JVC LST0103-001B Introduction, Inserting/removing CF memory card/LAN card, Inserting card, Memo

Page 3

Introduction

Inserting/removing CF memory card/LAN card

Lock release button

 

CF memory card or

Cover

LAN card

Section A

Card slot

EJECT button

KA-DV5000

Caution

●Make sure the power of GY-DV5000 is off when inserting/ removing a CF memory card/LAN card. Inserting/removing a card with the unit power on may damage the data storage section of the CF memory card or the card itself.

●Do not use the wireless LAN card continuously for more than 48 hours.

●The KA-DV5000 accepts the following cards for which operation has been confirmed: (As of August 2002)

Operating voltage

3.3 V

Current consumption

Max. 500 mA

• Wired LAN-card

 

US:

EA2900-117 (Revision C) (Name of manufacturer: Socket

 

Communications, Inc)*1

Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1

Asia: EA2906-194 (Revision C) (Name of manufacturer: Socket Communications, Inc)*1

*Revision indicated on the upper right of package production label.

•Wireless LAN-card TEW-201PC TEW-202CF

TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer: TRENDware)

WCF11 (Name of manufacturer: LINKSYS)*2 AIR-PCM350

(Name of manufacture: Cisco Systems)

FCCID: LDK102040

•CF (Compact Flash) card

SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)*1

*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter

*2: Use PCMCIA card TYPE 2 adapter

For the latest operational check card, visit the website below or contact your JVC dealer. http://www.jvc-victor.co.jp/english/pro/prodv/

1.

2.

3.

4.

5.

Inserting card

Turn off the GY-DV5000 power.

Press and hold the lock release button and open the cover.

Insert a card into the KA-DV5000 card slot. Then, close the cover.

●The cover may not close depending on the wired LAN card or the card shape. In this case, remove the cover by pressing section A and pulling on the cover.

Turn on the GY-DV5000 power.

Turn on the KA-DV5000 power.

LCD screen

C F Card status display

: No card

e : LAN card

C F : CF memory card

●Card status according to the inserted card type is displayed on the LCD screen/viewfinder screen. (☞ page 4)

(The viewfinder will show the status in black and white.)

Memo

When turning the power on, the card status display shown on left will flash during initial- ization.

Removing card

1.

2.

Turn off the GY-DV5000 power, or turn off the KA-DV5000 power.

Open the cover, press the EJECT button of KA-DV5000 and remove the card.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents KA-DV5000 Contents Memo IntroductionInserting/removing CF memory card/LAN card Inserting cardQCard status displays Display Description Receiving Level Indicator of Wireless LANWhen inputting the 44.1kHz sampling audio signal LCD screen/viewfinder screenFile Manage settings Menu screenMenu screen structure Network Pack Config menu screen items  indicates default factory setting Setting DescriptionMemo Setting Description Setting the Network Pack Config menu screen Dial button Network Setup Port Setup Wireless LAN Setup Server Setup Network settingsSetting the Network Main Setup menu screen Display the Network Setup menu screenNetwork Main Setup menu screen items FTP Password AD HOC Mode OFFSetup on WEB PasswordSetting user names and passwords \ Setting passwords\ Changing the user name BS Backspace delete previous character Making network related settingsSetting area Character Stop buttonNetmask Detailed IP settings LANFor 11 communication between PC and GY-DV5000/KA-DV5000 Dhcp OFF Proxy Server no USE Dhcp Server no USEProxy Server OFF Wlan CH Dhcp Server IP Address Detailed network settings WlanWlan AD HOC Mode Wlan ESS ID168 Wlan CH IP AddressOFF Wlan ESS ID Proxy Server No USE Dhcp Server IP AddressRecording on a CF card Formatting a CF memory cardCF memory recording time VTR trigger button Power switchSwitch Status buttonSet to Split Encode Setup menu screen LCD screen VTR trigger button Power Supply switchLCD screen Red display during recording Initializing Power switch Mode switch VTR trigger buttonSet to Execute Deleting Deleting all clip files on a CF memory cardMovie clip Playing back video/audio recorded on a CF memory card→ Over Button of GY-DV5000 for more than 2 seconds To move to another clip during playbackButton of GY-DV5000 REW button of GY-DV5000Protected Clip Function screen Power switch Mode switchProtecting a clip file on a CF memory card Clip number Clip Function screenDeleting Flashing display Deleting a clip file on a CF memory cardDialbutton TOP Menu screen Confirmation screenPlaying back CF memory card clips on your PC OperationCF memory CF Card reader LCD screen LAN card display Encode Setup menu screen Set to TrigLAN card Sending video using a LAN card no DV cassette tape recordingCard. Then, turn the power back on Controlling GY-DV5000/KA-DV5000 via LAN card Network pack setupSetting Description Factory setting Network Setup screenFor confirmation, input the new Wep Key again Description Factory SettingFor confirmation, input the new password again Ftp-user554 Port Setup screen8080 8554CAM & VTR Control screen \ Camera Control Setting rangeAdjustment mode selection Setting/descriptionVTR control icons \ VTR ControlMAX MID MIN Setting rangeEncode Parameters screen  MID MIN Frame Size BIT RateStatus/Time elapsed display Default destinationSaved file name Video displayVTR trigger button VTR trigger switch GY-DV5000 front About the Trigger Mode function TrigCAM Bars TRIG. button button button About the Cast function CastColor bar transmission Trigger transmissionSave destination folder Select the video display sizeOthers TOP page can be customizedUser ID Connecting Windows Media Player Connecting Quick Time Player About updating the network pack Network Update CANCELSwitch Stop button Network Pack Config menu screen Update menu screenScreen display Cause Remedy TroubleshootingSame OLD Password SET Wlan AD HOC ModeIllegal Setting SET Leap Mode OFFChecking communication/connection Terminology Host name Encryption modeAccess point wireless LAN ASF Advanced Streaming Format\ About IP address Global IP address and local IP addressIP address classes About proxy serverVictor Company of JAPAN, Limited KA-DV5000NETWORK Pack

LST0103-001B specifications

The JVC LST0103-001B is a cutting-edge addition to the world of high-performance audio technology, designed to elevate the listening experience for both casual listeners and audiophiles alike. This portable speaker stands out for its impressive sound quality, sleek design, and robust set of features.

One of the main features of the JVC LST0103-001B is its advanced audio technology, which includes high-fidelity drivers that deliver balanced sound across a wide frequency range. The speaker is engineered to produce deep bass tones while maintaining clarity in the mid and high ranges, ensuring that all genres of music are represented accurately. With an output power that rivals larger systems, the LST0103-001B can fill a room with rich sound, making it ideal for gatherings and outdoor events.

Another key aspect of this model is its Bluetooth connectivity. The JVC LST0103-001B supports the latest Bluetooth 5.0 technology, which not only provides seamless pairing with various devices such as smartphones and tablets but also ensures a stable connection with minimal audio latency. This feature enables users to enjoy their favorite tracks without interruptions, enhancing the overall listening experience.

Portability is a significant advantage of the JVC LST0103-001B. The lightweight design makes it easy to carry, whether for a day at the beach or a weekend camping trip. Additionally, the robust build quality ensures that it can withstand the rigors of outdoor use. With a long-lasting battery life, the speaker provides hours of playback on a single charge, making it a reliable companion for music lovers on the go.

The speaker also incorporates various user-friendly features, including an integrated microphone for hands-free calling, allowing users to take calls without disconnecting from their music. Furthermore, it comes with customizable EQ settings, letting users tailor the audio output to their personal preferences.

In conclusion, the JVC LST0103-001B is more than just a portable speaker; it is a versatile audio solution that combines advanced technologies, excellent sound quality, and portability, catering to the needs of music enthusiasts. With its modern design and thoughtful features, it stands out as a worthy investment for anyone looking to enhance their audio experience.
Top Page Image Contents