Network pack setup
NETWORK SETUP screen
Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network related settings.
Screen selection
Contact your network administrator for any unclear points concerning network settings.
Clicking the OK icon will confirm the inputted setting.
Item | Setting | Description | Factory setting |
|
|
|
|
Address Setup | MANUAL | The address setting mode can be selected. | MANUAL |
| DHCP | MANUAL : Select for MANUAL mode. |
|
|
| DHCP : Select for DHCP mode. |
|
|
|
|
|
IP Address |
| The IP address can be set. | 192.168.100.101 |
|
|
|
|
Subnet Mask |
| The subnet mask can be set. | 255.255.255.000 |
|
|
|
|
Default Gateway |
| The gateway address can be set. | 192.168.100.254 |
|
|
|
|
Host Name |
| The host name can be set. (Max: 63 alphanumerical characters) | none |
|
|
|
|
Domain Name |
| The domain name can be entered. (Max: 63 alphanumerical characters) | none |
|
|
|
|
DNS Server |
| The address of the domain name system server can be set. | 0.0.0.0 |
|
|
|
|
FTP Server |
| When selecting Change, settings can be made in the FTP Server |
|
Account |
| Account Setup screen. (☞ page 33) |
|
|
|
|
|
IBSS | The | OFF | |
| AHDM |
|
|
| OFF |
|
|
|
|
|
|
WLAN Channel | 1 CH | WLAN Channel can be set. | 10 CH |
| : |
|
|
| 10 CH |
|
|
| : |
|
|
| 14 CH |
|
|
|
|
|
|
|
| When selecting Change, settings can be made in the |
|
|
| screen. (Max: 32 alphanumerical characters) (☞ page 33) |
|
|
|
|
|
WEP | 64 Bit | WEP is set. | OFF |
| 128 Bit |
|
|
| OFF |
|
|
|
|
|
|
WEP Key |
| When selecting Change, settings can be made in the WEP Key Setup |
|
|
| screen. (☞ page 33) |
|
|
|
|
|
LEAP | ON | When set to ON, LEAP Server Account can be set. | OFF |
| OFF |
|
|
|
|
|
|
LEAP Server |
| When Change is selected, settings can be made in the LEAP Server |
|
Accout |
| Account Setup screen. (☞ page 33) |
|
|
|
|
|
Caution
If the IP address is changed in the Streamcorder screen, the unit will automatically jump to the new IP address. However, the screen may not be displayed correctly depending on the environment. In this case, access by specifying the new IP address using a browser. (☞ operation 7. on pages 31)
32