JVC K3-R specifications Setting the IP address using ARP, Setting IP Address with Telnet

Page 7

K3 1RU AB Switch

Page 7

Setting the IP address using ARP

To set the IP address using ARP, connect the jack marked 10Base-T to your local Ethernet network and apply power to the unit. The computer used to set the IP address must be on the same physical network as the C-AB-16-R . ARP does not work across switched or routed networks.

Windows (98 and Later)

1.Open a DOS window.

2.Type the following command:

arp -s <IP Address> <MAC Address>

Where <IP Address> is the desired IP address (in dotted decimal) for the C-AB-16-R and the <MAC address> is the MAC Address of the C-AB-16-R . The MAC Address is located on a label on the rear panel of the card.

Example: arp -s 63.211.86.165 00-50-c2-05-01-c1 <enter>

--- new IP addr. --- -------

MAC addr.

------

3.Ping the C-AB-16-R to program the IP address into the C-AB-16-R . Type: ping <IP Address>

If the ping command returns “host not responding” 4 times then the address has not been programmed properly, or the IP or MAC Address is incorrect. In either case redo step 2. If the problem persists, contact the Dataprobe Tech Support Hot Line.

4.Delete the entry from the ARP cache by typing: arp -d <IP Address>

5.Ping the C-AB-16-R to confirm that it has been programmed.

If the card fails to respond, repeat steps 2-4 above. If the problem persists contact the Dataprobe support hotline.

Unix, Linux

Consult your systems administrator for information on setting an IP Address using ARP. The unit should be pinged after the IP Address has been set to confirm proper operation.

Setting IP Address with Telnet

For initial setup, the computer used must use the same network segment as the default IP Address, or current IP address. (192.168.1.xxx) If this is not the case, use one of the other methods. To connect to the C-AB-16-R using telnet, run your telnet client program (provided with your operating system) and connect to the IP address as set in step one above.

For Windows:

Select Run…Telnet

 

 

Connect…192.168.1.254

(or the current IP address)

As soon as you connect the following message will be displayed:

K-16

Ver 4.00

Please Enter The Password

Password >

The factory default password is: PASS

Page 6 Page 8
Image 7
Page 6 Page 8
Contents General Description K3 Series 1U Rack Mount A/B SwitchesModular System AB Switch Status Indication Installation & Operation K3 ChassisPower Supply Power Supplies ModulesPower Access Panel Alarm ConnectorExternal Power Supplies Serial TCP Messaging Control ModulesAB-16-R TelnetSetting I/P Address Configuration C-AB-16-RSetting IP Address with Telnet Setting the IP address using ARPSet Location Setup Menu Location Name Setting IP Address with setip.exe Setting other Parameters Setting IP address via Serial PortIP Settings Web Browser Operation OperationK3 1RU AB Switch K3 1RU AB Switch Telnet and Serial Port Setup ExitMaking Connection via Ethernet and Serial Command Line and Direct TCP MessagingCommand Syntax Snmp Manager ControlGang Control Expansion Expansion Connector PinoutSwitch Modules Switch Interfaces SpecificationsPhysical Mib Tree MIB OutineTraps MIB Definitions K16Sync K16PowerSupply1K16PowerSupply2 SwitchChanged specific-5Warranty Technical SUPPORT, Returns and Warranty

K3-R specifications

The JVC K3-R is a well-regarded model in the realm of high-fidelity audio systems, designed specifically for enthusiasts seeking quality sound in a compact form. This device is notable for its combination of advanced technology and user-friendly features, making it a popular choice among audiophiles, casual listeners, and professionals alike.

At the core of the JVC K3-R is its high-resolution audio playback capability. Supporting a variety of audio formats, including FLAC, DSD, and PCM, this model ensures that users experience studio-quality sound without compromise. The K3-R's DAC (Digital-to-Analog Converter) is engineered to minimize distortion and maintain audio integrity, allowing for a rich and immersive listening experience.

The design of the K3-R is both practical and aesthetically pleasing. It boasts a sleek and modern look, making it a great addition to any home or studio setup. The compact design allows for easy placement on a desk or shelf without taking up excessive space, which is perfect for those who appreciate efficiency and elegance in their surroundings.

One of the standout features of the JVC K3-R is its connectivity options. It offers a range of input sources, including USB, optical, and coaxial connections, catering to various playback devices from computers to high-end music players. The inclusion of Bluetooth capability also represents a significant advantage, enabling wireless streaming from smartphones and tablets.

In terms of user interface, JVC has prioritized simplicity and accessibility. The K3-R features an intuitive control scheme complete with tactile buttons and a clear display, making it easy to navigate through menus and settings. Moreover, it supports remote control functionality, allowing users to operate the device from a distance.

The K3-R is also equipped with customizable equalizer settings, empowering users to tailor their audio experience to their personal preferences. Whether one prefers boosted bass for an energetic track or a more balanced sound for classical compositions, this feature ensures that every listening session can be personalized.

In conclusion, the JVC K3-R represents a notable fusion of advanced audio technology and user-centered design. Its high-resolution playback, versatile connectivity, and ease of use make it an excellent choice for anyone seeking to elevate their listening experience, whether at home or on the go. By combining performance with practicality, the K3-R stands out as a reliable option in today’s competitive audio market.
Top Page Image Contents