JVC DLA-RS2 manual Setup Picture Position, Setup Hdmi Input Level, Setup Mask, Setup Overscan

4 Settings

Setting Menu (Continued)

Setup > Picture Position

M Picture Position

Adjusts the horizontal/vertical position of the projected image.

zThe display position value varies with the input signal.

zThis adjustment is available for analog input signals, or for COMPONENT and HDMI-1/2 input signals when “V-Stretch” is set to “On”.

Setup > HDMI Input Level

N HDMI Input Level

Configures the input level setting of the HDMI input terminal.

StandardFor normal circumstances, select this setting.

Enhanced

Select this setting when the black-and-white of the projected image is unclear when RGB video signals are input from DVI devices.

zThis setting is available only when projecting the HDMI input.

Setup > Mask

OMask

Masks (Hides) the outer area of the projected image.

2.5%	Masks 2.5 % of the screen.
5%	Masks 5 % of the screen.
Off	No masking.

zMasking is available only when high definition images are input.

Setup > Overscan

POverscan

Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).

Off	No overscan.
On	Overscans the top, left, bottom and right at 2.5 % each.

zThis setting is not available when PC signals are input to HDMI terminal.

Source > COMP

Q COMP

Configures the input signals of the component video input terminals.

Y Pb/Cb Pr/Cr	Select this when component video signals are input.
RGB	Select this when RGB video signals are input.
SCART	Select this when RGB video signals and sync signals are input from SCART plug for
	European market.

zThis setting is available only when projecting the component video input.

Source > HDMI

R HDMI

Configures the input signals of the HDMI input terminal.

Auto	Automatically configures input signals.
YCbCr(4:4:4)	Select this when Y Cb Cr (4:4:4) video signals are input.
YCbCr(4:2:2)	Select this when Y Cb Cr (4:2:2) video signals are input.
RGB	Select this when RGB video signals are input.

zThis setting is available only when projecting the HDMI input.

28