JVC DLA-RS2 Install. Line Display, Install. Flip H, Install. High Altitude Mode, Func. Back Color

ENGLISH

Install. > Line Display

a Line Display

Sets whether to display the input when switching input.

5 sec	Displays for 5 seconds.
Off	Do not display.

Install. > Flip H

b Flip H

Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.

Off	Do not flip image to the left or right.
On	Flips image to the left or right.

Install. > Flip V

c Flip V

Select this when the projector is hung from the ceiling.

Off	Do not flip image up or down.
On	Flips image up or down.

Install. > High Altitude Mode

d High Altitude Mode

Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).

Off	Do not activate.
On	Activate.

Func. > Back Color

e Back Color

Configures the screen color displayed when there is no input signal.

Blue	Sets screen color to “Blue”.
Black	Sets screen color to “Black”.

Func. > Sleep Timer

f Sleep Timer

Sets the lapse time before automatically switching to the standby mode when there is no input signal.

15	Switch to standby mode after 15 minutes.
30	Switch to standby mode after 30 minutes.
60	Switch to standby mode after 60 minutes.
Off	Do not switch to standby mode.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

31