4 Settings
Setting Menu (Continued)
Setup > Picture Position
M Picture Position
Adjusts the horizontal/vertical position of the projected image.
zThe display position value varies with the input signal.
zThis adjustment is available only for analog input signals.
Setup > HDMI Input Level
N HDMI Input Level
Configures the input level setting of the HDMI input terminal.
| Standard | For normal circumstances, select this setting. |
|
|
|
| Enhanced | Select this setting when the |
| RGB video signals are input from DVI devices. | |
|
| |
|
|
|
zThis setting is available only when projecting the HDMI input.
Setup > Mask |
| |
|
| |
O Mask |
| |
|
|
|
Masks (Hides) the outer area of the projected image. | ||
|
| |
| 2.5% | Masks 2.5 % of the screen. |
|
|
|
| 5% | Masks 5 % of the screen. |
|
|
|
| Off | No masking. |
|
|
|
zMasking is available only when high definition images are input.
Setup > Overscan
P Overscan
Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).
| Off | No overscan. |
|
|
|
| On | Overscans the top, left, bottom and right at 2.5 % each. |
|
|
|
Source > COMP
Q COMP
Configures the input signals of the component video input terminals.
| Y Pb/Cb Pr/Cr | Select this when component video signals are input. |
|
|
|
| RGB | Select this when RGB video signals are input. |
|
|
|
| SCART | Select this when RGB video signals and sync signals are input from SCART plug for |
| European market. | |
|
| |
|
|
|
zThis setting is available only when projecting the component video input.
Source > HDMI
R HDMI
Configures the input signals of the HDMI input terminal.
| Auto | Automatically configures input signals. |
|
|
|
| YCbCr(4:4:4) | Select this when Y Cb Cr (4:4:4) video signals are input. |
|
|
|
| YCbCr(4:2:2) | Select this when Y Cb Cr (4:2:2) video signals are input. |
|
|
|
| RGB | Select this when RGB video signals are input. |
|
|
|
zThis setting is available only when projecting the HDMI input.
28