English

-To allow better heat dissipation, keep a clearance between this unit and its surrounding as shown below. When this unit is enclosed in a space of dimensions as shown below, use an air-conditioner so that the internal and external temperatures are the same.

	150 mm and above
300 mm	300 mm
and above	and above
150 mm
and above	200 mm
	200 mm
	and above

-This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

-This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

-For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

-Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

-Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.

-Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:

a)When the power supply cord or plug is damaged.

b)If liquid has been spilled, or objects have fallen on the product.

c)If the product has been exposed to rain or water.

d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

e)If the product has been dropped or damaged in any way.

f)When the product exhibits a distinct change in performance - this indicates a need for service.

-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

-The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat.

-When connecting other products such as VCR’s, and DVD players, you should turn off the power of this product for protection against electric shock.

-Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special hazards when over heated.

-Do not look into the projection lens while the illumination lamp is turned on. Exposure of your eyes to the strong light can result in impaired eyesight.

-Do not look into the inside of this unit through vents (ventilation holes), etc. Do not look at the illumination lamp directly by opening the cabinet while the illumination lamp is turned on. The illumination lamp also contains ultraviolet rays and the light is so powerful that your eyesight can be impaired.

-Do not drop, hit, or damage the light-source lamp (lamp unit) in any way. It may cause the light-source lamp to break and lead to injuries. Do not use a damaged light source lamp. If the light-source lamp is broken, ask your dealer to repair it. Fragments from a broken light-source lamp may cause injuries.

-The light-source lamp used in this projector is a high pressure mercury lamp. Be careful when disposing of the lightsource lamp. If anything is unclear, please consult your dealer.

-Do not ceiling-mount the projector to a place which tends to vibrate; otherwise, the attaching fixture of the projector could be broken by the vibration, possibly causing it to fall or overturn, which could lead to personal injury.

-Use only the accessory cord designed for this product to prevent shock.

*DO NOT allow any unqualified person to install the unit.

Be sure to ask your dealer to install the unit (e.g. attaching it to the ceiling) since special technical knowledge and skills are required for installation. If installation is performed by an unqualified person, it may cause personal injury or electrical shock.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

DLA-RS1X specifications

The JVC DLA-RS1X stands out as an exceptional 4K D-ILA projector designed for home cinema enthusiasts seeking a premium viewing experience. Building upon the legacy of its predecessor, this model integrates cutting-edge technologies and features that elevate the appreciation of film and video content.

One of the standout features of the DLA-RS1X is its true 4K resolution, delivering stunning visuals with a pixel count of 3840 x 2160. The projector employs JVC’s proprietary D-ILA (Direct-Drive Image Light Amplifier) technology, which ensures that images are not only sharp and detailed but also exhibit smooth motion characteristics, crucial for immersive viewing during action-packed sequences.

The projector supports High Dynamic Range (HDR) content, significantly enhancing the dynamic range and color accuracy. With HDR compatibility, users can enjoy deeper blacks and brighter whites, resulting in a more lifelike image. The DLA-RS1X also incorporates JVC’s 8K e-shift technology, which allows for upscaling lower-resolution content to near 8K quality, enhancing the detail perceived on screen.

The DLA-RS1X is equipped with advanced optical components, including a high-quality lens that boasts a 17-element structure designed to minimize chromatic aberration and distortion. This attention to detail ensures that viewers experience a consistent image quality across the entire screen. It supports a lens shift, allowing for flexible installation options while maintaining proper image alignment.

Another significant aspect of the DLA-RS1X is its strong color performance, achieved through its wide color gamut, which allows the projector to reproduce a broader spectrum of colors. This capability is particularly beneficial for those who appreciate the visual fidelity of cinematic presentations.

In terms of connectivity, the DLA-RS1X is outfitted with multiple HDMI inputs, supporting both standard and extended colorimetry options. The projector also features a user-friendly interface that makes it easy to navigate settings and calibrate the picture to individual preferences.

Overall, the JVC DLA-RS1X combines state-of-the-art imaging technology with a robust feature set, making it an outstanding choice for serious home theater setups. Whether watching the latest blockbuster or enjoying classic films, the DLA-RS1X promises a captivating and stunning viewing experience. Its blend of advanced features, exceptional image quality, and user-centric design solidifies its position as a leading projector in the home cinema market.