JVC AV-P950E manual Before USE, Part names, Setup

Page 4

BEFORE USE

Part names

Remote control light reception section

Camera head

Slide film holder

Camera arm

Close-up lens

Side illumination

Side illumination

Lock release button

Rear panel

(UNLOCK)

POWER switch

Stage

Back illumination

Control panel

Setup

1. While pressing the UNLOCK button 1, raise the camera

2

1

arm so that it stands in the direction shown 2.

 

2. When the camera arm is raised all the way, release the UNLOCK button.

3.

4.

When the UNLOCK button returns to its original position and the camera arm is locked, release the camera arm.

Turn the camera head in the direction shown 3 until a click is heard. The camera head should now be facing the stage.

5. Move the side illumination arms in the directions shown, first 4 and then 5.

3

CAUTION

•When using the UNLOCK button, do not release the camera arm until it is locked. Do not apply exces-

sive force on the side illuminations (arms and lights),

4

5

otherwise, a malfunction or injury may result.

 

 

 

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Digital Presenter Safety Precautions Features ContentsHandling Precautions Before USE SetupPart names Rear panel Operation Control panelZoom Preset BrightnessAuto White SET FreezeRear panel ModeRemote EXT InputDC Output USBVideo OUTPUT, Video Output Video Output Operation Menu adjustment Functions Remote control unit FunctionsPresentation Basic Printed material and 3-dimensional objectsSlide presentation Transparent material such as OHP sheets Capturing images of surrounding objectsPreview mode  Connection and setting Operating procedure Presentation Application Operating procedure Storing in Picture Memory Operating procedurePicture memory Position camera angle functionExternal Control Optional Book HolderTroubleshooting Symptoms Check these pointsSpecifications PALAV-P950E Digital Presenter
Top Page Image Contents