●You can perform the same operations using a remote control unit (see the Remote control unit section on page 11).
BRIGHTNESS
Use to adjust the brightness of a camera picture.
AUTO: Press this button to automatically adjust the brightness. The indicator blinks.
When brightness adjustment is complete, this indicator goes out.
DARKER: Press to make the picture darker.
BRIGHTER: Press to make the picture brighter.
AUTO WHITE SET
Use to adjust the white balance of a camera picture automatically. Shoot a white paper in full screen, adjust the brightness and then press the button. The indicator blinks and the white balance is set automatically. When adjustment is complete, the indicator goes out.
•When lighting in the surround- ings changes, adjust the white balance again.
ZOOM PRESET
Use to set a camera picture size to A4 or A5 at the touch of a button. A4/LETTER: Press to show A4
A5: Press to show A5
ENGLISH |
BRIGHTNESS |
AUTO DARKER BRIGHTER
ZOOM PRESET
AUTO WHITE
SET
A4/LETTER A5
| FOCUS |
| FREEZE |
|
| ZOOM |
AUTO | NEAR | FAR | OFF | ON | OUT | IN |
|
|
|
Note on focus operation
Under the following conditions, it may not be possible to obtain proper focus with the AUTO button. In this case, adjust the focus with the FAR or NEAR button.
•Object with low contrast
•Shiny object
•Dark screen
•Horizontal stripes
•Lattice pattern
•Moving object
•Object not located at the center of the screen
•
FREEZE
Use to switch the camera or picture between live action still images.
OFF: Press to show the camera picture as a live action im- age.
ON: Press to show the camera picture as a still image. Use this function when changing material for a smoother presentation.
ZOOM
Use to increase or decrease the size of an object shot output by the camera.
OUT: Press to show all of or most of an object.
IN: Press to enlarge a specif- ic part of an object.
•When the digital zoom is set to x2 or x4, the picture may shake a little while the magni- fication value is being changed.
7