Onkyo HT-S990THX Speaker Configuration, Left and Right Buttons to Select 2ch or 1ch

Advanced Setup—Continued

Speaker Configuration settings only need to be changed if you’re not using the speakers in this package.

These settings cannot be changed while head- phones are connected, speaker set B is on, or the multichannel DVD input is being used.

Speaker Configuration

These settings are used to specify which speakers are connected.

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.

	SETUP
2	Use the Up and Down [ ]/[ ]

buttons to select “2. SP Config,” and then press the [ENTER] but- ton.

3	While the Subwoofer setting is
	selected, use the Left and Right
	[ ]/[ ] buttons to select Yes or
	No.
	Yes: Select if a subwoofer is con-
	nected.
	No: Select if no subwoofer is con-
	nected.
4	Use the Down [	] button to
	select “Center,” and then use the
	Left and Right [	]/[ ] buttons to
	select Yes or No.

Yes: Select if the center speaker is connected.

No: Select if no center speaker is connected.

5	Use the Down [	] button to
	select “Surround,” and then use
	the Left and Right [		]/[ ] but-
	tons to select Yes or No.
	Yes: Select if the surround speak-
	ers are connected.
	No: Select if no surround speakers
	are connected.
6	Use the Down [	] button to
	select “Surr Back,” and use the
	Left and Right [	]/[	] buttons to
	select Yes or No.
	Yes: Select if the surround back
	speakers are connected.
	No: Select if no surround back
	speakers are connected.
7	Use the Down [	] button to
	select “SurrBack ch,” and use the
	Left and Right [	]/[	] buttons to
	select 2ch or 1ch.

2ch: Select if two (left and right) surround back speakers are connected.

1ch: Select if one surround back

speaker is connected.

Note:

•If the Surround and Surr Back set- tings in steps 5 and 6 are set to No, this setting does not appear.

8	Press the [SETUP] button.
	Setup closes.
	SETUP

55