DLP Projjjectttor—User’s Manualll
Lan Control Settings
Press the ENTER button to enter the Lan Control Settings sub menu.
ITEM | DESCRIPTION | |
|
| |
Control By | Press the ◄► buttons to select projector remote command control. (Range: RS232/ RJ45) | |
|
| |
Network State | Press the ENTER button to enter the Network State sub menu. | |
See Network State on page 26. | ||
| ||
|
|
Network State
ITEM | DESCRIPTION | |
|
| |
Network State | Displays the network connection status. | |
|
| |
| Press ◄► to turn DHCP On or Off. | |
DHCP | Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and DNS | |
| fields. | |
|
| |
Projector IP Address | Enter a valid IP address if DHCP is turned off. | |
|
| |
Subnet Mask | Enter a valid Subnet Mask if DHCP is turned off. | |
|
| |
Default Gateway | Displays the default Gateway address on the network. | |
|
| |
DNS | Enter a valid DNS name if DHCP is turned off. | |
|
| |
Apply | Press (Enter) / ► to confirm settings. | |
|
|
– 26 –