Knoll Systems HT211, HT201 user manual Operation, Using the Projector

Page 13

Operation

Using the Projector

1)Connect the supplied power cable to the projector, then to the wall outlet (the mains). The POWER indicator on top of the unit lights in amber.

2)Press the POWER ON button on the remote control or the POWER button on top of

the unit to turn on the unit.

The POWER indicator on top of the unit turns to green and start blinking. It will take about one minute for the projector to be ready to use. Wait until the indicator stops blinking and lights steadily in green.

Note: While the POWER indicator is blinking, the unit doesn't turn off even if you press the POWER OFF button on the remote control or the POWER button on the unit.

3) Turn on the connected source (computer, VCR, DVD player, etc.).

If you use a video component, start playback for screen/image adjustment.

4) Press VIDEO or RGB to select the input source.

You can also select the input source with the menu operation.

Notes

•If the blue, black or focus pattern screen (the background type differs depending on the

"BACKGROUND" setting.) is projected, check the following:

-Is the source is properly connected to the unit?

-Is the source component or computer turned on?

-Is the video signals are coming to the projector?

•The video resolution of the connected computer can be changed.

5)Adjust the position and height of the unit.

Move the unit to the position where the projected image is horizontally centered to the screen. The internal keystone adjustment can adjust for some horizontal problems, but the best image is obtained when the projector is optimality positioned.

•When the projected image is offset horizontally

Adjust the position of the unit so that the unit is square to the screen

•When the projected image is offset vertically Adjust the height balance of the unit with the adjusters.

Using the adjusters to adjust the height balance

There are two adjusters one on the front and one on the side.

To lower the position of the screen, pull out the folded leg of the rear adjuster.

For the side adjuster, rotate the adjuster until the unit is horizontally parallel to the screen.

6)Adjust the focus with the focus ring and if required use the keystone adjustment to parallel the side of the image with the screen.

7)Change the unit setting to suit to the projecting method and selected source as described in step 4.

• Select the type of projection

If the projected image is horizontally reversed or upside down, change the projection type. See page 16.

• If the component video signal output jacks of the video component are connected to the

RGB IN connector, set the RGB input to YCbCr" in the menu. This setting can provide a better picture image.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Includes Plus CORPORATION micro light engine HT201/HT211Power Supply InstallationCleaning Lamp ReplacementTable of Contents Congratulations On Your Purchase of the Knöll Projector Basic InformationSharp, clear images Remote control effective range Remote Control Inserting the batteriesPage Projection distance is 1.457 x screen diagonal size Projector PositioningBefore connecting Connecting to the Video in VIDEO/S-VIDEO JacksBefore connecting Before connecting Connecting a PC or MacintoshMacintosh adapter cable DIP switch setting o=ON Modifying the DIP switch for Macintosh settingSome examples of DIP switch settings Sub Pin Assignments Operation Using the ProjectorPage Turning off the image and muting the sound temporarily Adjusting the volume of the projector speakerFreezing a moving picture Enlarging the picture Menu operationSelecting the input source with the remote Projection Type HT201/HT211 MenuChanging Aspect Ratio Setting Input Mode to YCbCr or Component VideoAspect Ratio Type Means SUN Timing Chart Signal Resolution Sync Dot Clock KHz MHzManual Adjustment of Computer Images Adjusting the picture elementsAdjusting position of the image Resetting the lamp use hours to zeroOptical SpecificationsElectrical MechanicalTroubleshooting Common Problems & Solutions Status Light Message Replacing the lamp housingKnoll Systems Lamp Replacement Procedure

HT211, HT201 specifications

Knoll Systems has garnered a reputation for providing high-quality audio solutions, and two of its standout products are the HT201 and HT211 home theater systems. These systems cater to audio enthusiasts looking for exceptional sound quality and advanced features in a compact design.

The HT201 is designed for those who seek an immersive listening experience without overwhelming their living space. One of its main features is its compact size, making it easily adaptable to various room layouts. This system consists of a dynamic 2.1 channel setup, which includes two satellite speakers and a subwoofer. The subwoofer, with its powerful bass response, ensures that users enjoy deep, resonant low frequencies that enhance movie soundtracks and music alike.

Conversely, the HT211 takes the audio experience a step further. This system boasts a 5.1 channel setup, allowing users to experience multi-dimensional sound. It includes five satellite speakers and a subwoofer, providing an enveloping audio experience that makes users feel as if they are part of the action. The HT211 is particularly suited for home theater setups, where clarity and presence are paramount.

Both systems incorporate advanced technologies for optimizing sound performance. They feature built-in Dolby Digital decoding, which enhances audio quality by providing rich soundscapes for movies, games, and music. Additionally, the systems support various connectivity options, including HDMI, optical, and line-in, catering to different user preferences and equipment compatibility.

The wireless capabilities of both models are noteworthy, allowing users to stream music effortlessly from their smartphones or tablets. This feature adds to the convenience and versatility of the systems, making them ideal for modern audio needs.

Another characteristic that sets Knoll Systems apart is their attention to craftsmanship. Both the HT201 and HT211 are crafted with quality materials that not only look great in any setting but also contribute to their impressive sound characteristics. The sleek design complements contemporary home decor, making them an attractive addition to any room.

In summary, the Knoll Systems HT201 and HT211 offer distinct advantages to audio lovers, with the former focusing on compact versatility and the latter embracing a full-fledged home theater experience. Both systems represent the superior engineering and design ethos that Knoll Systems is known for, providing exceptional sound quality and advanced features for users to enjoy. Whether users are watching movies, playing games, or listening to music, these systems deliver a remarkable auditory journey.
Top Page Image Contents