Knoll Systems HT211, HT201 Remote Control Inserting the batteries, Remote control effective range

Page 5

Remote Control Inserting the batteries

1)Press firmly and slide the battery cover off.

2)Insert the supplied two batteries (size AAA). Ensure that the polarities (+ and -) of the batteries are aligned correctly. Always replace batteries with fresh alkaline type.

3)Slip the cover back over the batteries until it snaps into place.

Notes

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

If you will not be using the remote control for a long time, remove the batteries.

Do not mix new and old or different types of batteries.

There are operations that can only be carried out by remote control. Handle the remote control carefully.

Remote control effective range

Each side of the projector has a remote sensor. The controllable range is 50 degrees horizontally and 30 degrees vertically relative to a line that is at a right angle to the remote sensor. And the distance between the point of the remote control and remote sensor must be no more than four to five meters (about 15’).

.

5

Image 5
Contents Includes Plus CORPORATION micro light engine HT201/HT211Power Supply InstallationCleaning Lamp ReplacementTable of Contents Sharp, clear images Basic InformationCongratulations On Your Purchase of the Knöll Projector Remote control effective range Remote Control Inserting the batteriesPage Projection distance is 1.457 x screen diagonal size Projector PositioningBefore connecting Connecting to the Video in VIDEO/S-VIDEO JacksBefore connecting Before connecting Connecting a PC or MacintoshSome examples of DIP switch settings Modifying the DIP switch for Macintosh settingMacintosh adapter cable DIP switch setting o=ON Sub Pin Assignments Operation Using the ProjectorPage Freezing a moving picture Adjusting the volume of the projector speakerTurning off the image and muting the sound temporarily Enlarging the picture Menu operationSelecting the input source with the remote Projection Type HT201/HT211 MenuAspect Ratio Type Means Setting Input Mode to YCbCr or Component VideoChanging Aspect Ratio SUN Timing Chart Signal Resolution Sync Dot Clock KHz MHzManual Adjustment of Computer Images Adjusting the picture elementsAdjusting position of the image Resetting the lamp use hours to zeroOptical SpecificationsElectrical MechanicalTroubleshooting Common Problems & Solutions Status Light Message Replacing the lamp housingKnoll Systems Lamp Replacement Procedure

HT211, HT201 specifications

Knoll Systems has garnered a reputation for providing high-quality audio solutions, and two of its standout products are the HT201 and HT211 home theater systems. These systems cater to audio enthusiasts looking for exceptional sound quality and advanced features in a compact design.

The HT201 is designed for those who seek an immersive listening experience without overwhelming their living space. One of its main features is its compact size, making it easily adaptable to various room layouts. This system consists of a dynamic 2.1 channel setup, which includes two satellite speakers and a subwoofer. The subwoofer, with its powerful bass response, ensures that users enjoy deep, resonant low frequencies that enhance movie soundtracks and music alike.

Conversely, the HT211 takes the audio experience a step further. This system boasts a 5.1 channel setup, allowing users to experience multi-dimensional sound. It includes five satellite speakers and a subwoofer, providing an enveloping audio experience that makes users feel as if they are part of the action. The HT211 is particularly suited for home theater setups, where clarity and presence are paramount.

Both systems incorporate advanced technologies for optimizing sound performance. They feature built-in Dolby Digital decoding, which enhances audio quality by providing rich soundscapes for movies, games, and music. Additionally, the systems support various connectivity options, including HDMI, optical, and line-in, catering to different user preferences and equipment compatibility.

The wireless capabilities of both models are noteworthy, allowing users to stream music effortlessly from their smartphones or tablets. This feature adds to the convenience and versatility of the systems, making them ideal for modern audio needs.

Another characteristic that sets Knoll Systems apart is their attention to craftsmanship. Both the HT201 and HT211 are crafted with quality materials that not only look great in any setting but also contribute to their impressive sound characteristics. The sleek design complements contemporary home decor, making them an attractive addition to any room.

In summary, the Knoll Systems HT201 and HT211 offer distinct advantages to audio lovers, with the former focusing on compact versatility and the latter embracing a full-fledged home theater experience. Both systems represent the superior engineering and design ethos that Knoll Systems is known for, providing exceptional sound quality and advanced features for users to enjoy. Whether users are watching movies, playing games, or listening to music, these systems deliver a remarkable auditory journey.