Onkyo HT-SP904 Equalizer Settings, Setup menu closes, Buttons to select Equalizer

Page 61

Advanced Setup—Continued

Equalizer Settings

These settings are set automatically by the Automatic Speaker Setup function (see page 37).

Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 60.

1

 

Press the [RECEIVER] REMOTE

RECEIVER

MODE button, followed by the

 

 

 

 

[SETUP] button.

 

SETUP

 

2

 

Use the Up and Down [ ]/[ ]

 

 

buttons to select “Equalizer,” and

then press [ENTER].

5

6

Use the Up and Down []/[ ] buttons to select a frequency. Use the Left and Right []/[ ] buttons to adjust the level at that frequency.

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

Tip: Low frequencies (e.g., 80 Hz) affect bass sounds; high frequencies (e.g., 8000 Hz) affect treble sounds.

Use the Up [] button to select “Ch,” and then use the Left and Right []/[ ] buttons to select another speaker.

Repeat steps 5 and 6 for each speaker. Speakers that you’ve set to No or None in the Speaker Configuration (page 57) cannot be selected.

3

4

Use the Left and Right []/[ ] buttons to select:

Off: Tone off, response flat. Audyssey: The tone for each speaker

is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup.

Manual: You can adjust the equal- izer for each speaker manually.

If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 7.

Press the Down [ ] button, and then use the Left and Right

[]/[ ] buttons to select a speaker.

7

Press the [SETUP] button.

 

 

The setup menu closes.

SETUP

Notes:

The front, center, and surround speakers can be adjusted at 80 Hz, 250 Hz, 800 Hz, 2500 Hz, and 8000 Hz. The subwoofer can be adjusted at 40 Hz, 80 Hz, and 160 Hz.

While the Direct listening mode is selected, the equal- izer settings have no effect.

This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

61

Image 61
Contents HT-SP904 Avis Important Safety InstructionsPower PrecautionsFor models having a power cord with a polarized plug FCC Information for UserPackage Contents Speaker PrecautionsPackage Contents Features Contents Automatic Speaker Setup SetupHdmi Video Digital Input Input DisplayFront Panel Getting to Know the AV ReceiverDisplay Getting to Know the AV ReceiverRear Panel Installing the Batteries Remote ControllerAiming the Remote Controller Using the Remote Controller Remote ControllerRECEIVER/TAPE Mode Remote Mode buttons Listening Mode buttonsButtons used when the Tuner input is selected Buttons used when the Tape input is selectedDVD Mode To select the input source, press CD/MD/CDR/DOCK ModeDISC/ALBUM +/- button Arrow / and Enter buttonsSubwoofer SKW-750 SpeakersUsing Rubber Spacers with the Speakers Connecting Your SpeakersEnjoying Home Theater Front left and right speakers SKF-750FSpeaker Connection Precautions Connecting Your SpeakersUsing the Speaker Terminal Tool Connecting SpeakersCenter Speaker Base Using the included rubber spacersWall Mounting Mounting verticallyConnecting the AM Loop Antenna Connecting AntennasConnecting the Indoor FM Antenna Attach the FM antenna, as shownConnecting an Outdoor FM Antenna Connecting AntennasConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Audio and Video Signals to the AV Receiver Connecting Your ComponentsWhich Connections Should I Use? Audio Connection FormatsHint Connecting a TV or ProjectorChoose a video connection from a , B , and C Connecting a DVD playerDVD player Hooking Up the Multichannel DVD Input Assign the Hdmi Connecting Components with HdmiTurn on the AV receiver, and then assign the Hdmi in see TipVCR or DVD recorder Connecting a VCR or DVD Recorder for PlaybackVCR DVD recorderConnecting a Camcorder, Games Console, or Other Device Connecting a VCR or DVD Recorder for RecordingChoose a video connection from a and B Make the video connection a Make the audio connection aSatellite, cable, set-top box, etc Video sourceCD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableIf Your iPod Supports Video Connecting the DS-A1X RI Dock for the iPodIf Your iPod Doesn’t Support Video Cassette recorder, CDR, etc Connecting a Cassette, CDR, MiniDisc, or DAT RecorderCassette/CDR/MD/DAT recorder Connecting the Power Cord Connecting Onkyo ComponentsAuto Power On/Standby Remote ControlTurning On and Standby Turning On the AV ReceiverSmooth Operation in a Few Easy Steps Automatic Speaker Setup Audyssey 2EQ First Time SetupMeasurement Points Using Audyssey 2EQ First Time SetupTo Retry the Automatic Speaker Setup Error MessagesChanging the Speaker Settings Manually Using a Powered SubwooferHdmi Video Setup Changing the Input Display Digital Audio Input SetupPlaying Your AV Components Select a suitable listening mode and enjoyBasic AV Receiver Operation Playing Your AV Components Using the Multichannel DVD InputDisplaying Source Information Listening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations Listening to the Radio Presetting AM/FM StationsDS-A1X RI Dock for the iPod DS-A1X Package ContentsAbout the RI Dock Compatible iPodsDS-A1X RI Dock for the iPod Adjusting the iPod AdapterPutting Your iPod in the RI Dock Function OverviewCharging Your iPod’s Battery Using Your iPod’s Alarm ClockSetting the Display Brightness Adjusting the Bass and TrebleCommon Functions Muting the AV ReceiverAdjusting Speaker Levels Using the Sleep TimerUsing Headphones Common FunctionsSelecting with the Remote Controller Using the Listening ModesThis button selects the Stereo listening mode Selecting Listening ModesAbout the Listening Modes Using the Listening ModesDirect StereoOnkyo Original DSP Modes Use this mode when playing game discsDTS Using the Late Night Function Dolby Digital only Using the CinemaFILTERUsing the Audio Adjust Settings Plii Music Mode Settings Input Channel SettingsDTS Neo6 Music Mode Setting Listening Angle SettingRecording the Input Source RecordingRecording Audio and Video from Separate Sources Advanced Speaker Settings Advanced SetupSpeaker Configuration Crossover Frequency Advanced SetupDouble Bass Speaker Distance Speaker Levels Setup closesButtons to select Level Cal, and then press Enter Pink noise test tone is output by the front left speakerSetup menu closes Equalizer SettingsButtons to select Equalizer, Correcting Sound and Picture Sync Digital Input Signal FormatsControlling Other Components Entering Remote Control CodesResetting Remote Mode Buttons Remote Control Codes for Onkyo Components Connected viaResetting the Remote Controller Controlling Other ComponentsTV VOL STANDBY/ON, TVCH + Operates the VCRTroubleshooting Troubleshooting AV receiver’s remote controller doesn’t control your iPod Remote controller doesn’t workSound changes when I connect my head- phones Can’t control other componentsFunctions don’t work AV Receiver HT-R557 SpecificationsRI Dock DS-A1X 1ch Home Theater Speaker Package HTP-650 SpecificationsOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe UK Office Onkyo China Limited

HT-SP904 specifications

The Onkyo HT-SP904 is a sophisticated home theater system that combines sleek design with cutting-edge audio technology, providing a comprehensive solution for immersive entertainment experiences. This system is aimed at both home theater enthusiasts and casual viewers, delivering exceptional sound quality whether you're watching movies, playing games, or listening to music.

One of the standout features of the HT-SP904 is its powerful 5.1-channel speaker configuration. This includes five satellite speakers and a subwoofer that work together to create an enveloping soundstage. Each satellite speaker is designed to deliver rich mids and highs, while the dedicated subwoofer adds deep, rumbling bass that enhances the overall audio experience. This setup is perfect for enjoying the nuances of a film's score or the dynamic effects in an action sequence.

The HT-SP904 also incorporates Onkyo's proprietary Wide Range Amplification Technology (WRAT), which ensures that audio is reproduced with clarity and detail. WRAT minimizes distortion across various volume levels, allowing users to experience music and dialogue as intended by the creators. This technology contributes to the system's ability to reproduce high-fidelity sound, making it ideal for both cinematic audio and music playback.

Connectivity is another strong suit of the HT-SP904. It features multiple HDMI inputs, enabling seamless integration with the latest Blu-ray players, gaming consoles, and streaming devices. Furthermore, the inclusion of 4K video pass-through ensures that users can enjoy high-definition visuals without compromising picture quality. The system also supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, which enhance the home cinema experience by providing immersive surround sound.

The sleek and stylish design of the HT-SP904 allows it to complement a variety of home decor styles. The front panel is elegantly crafted, and the satellite speakers can be either mounted on walls or placed on stands, providing flexibility in setup.

In summary, the Onkyo HT-SP904 is a powerful home theater system that excels in sound quality, connectivity, and design. With its 5.1-channel setup, advanced amplification technology, and support for high-definition audio and video formats, it caters to both the needs of audiophiles and the everyday viewer. Whether you’re hosting a movie night or enjoying your favorite playlist, the HT-SP904 promises a compelling audio experience that enhances any entertainment setting.