Bosch Appliances UML-273-90 installation manual Connecting the Y/C S-Video Signal to the Monitor

30 en Installing the Monitor	Bosch High Performance
	HD LED Monitors

5.4Connecting the Y/C (S-Video) Signal to the Monitor

There is one (1) mini-DIN type connector for the S-Video (Y/C) input (refer to Rear Panels, page 20) on the rear side panel. Note: Both Y and C inputs are terminated with 75 Ohm.

Figure 5.1: Y/C Connector pin-out

Number	Input
1	Ground
2	Ground
3	Y-signal
4	C-signal

5.5Connecting Audio to the Monitor

There are three (3) set of stereo audio connectors for audio inputs, located on the rear panel.This audio inputs are not associated with any input terminals on the rear panel, and can be freely connected to any audio input.

5.6Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor: HDMI, DVI, and VGA.

5.6.1HDMI Connection

The monitor can be connected to the HDMI (High Definition Multimedia Input) by connecting a HDMI cable (not supplied).

2013.02 3.0 Installation Manual Bosch Security Systems, Inc.