Onkyo HT-S6100 instruction manual Adjusting the Listening Modes, Using the Audio Adjust Settings

Adjusting the Listening Modes

Using the Audio Adjust Settings

With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [ ]/[ ]
	buttons to select “3. Audio
	Adjust,” and then press [ENTER].

3	Use the Up and Down [ ]/[ ]
	buttons to select an item, and
	then press [ENTER].

3.Audio Adjust

1.Multiplex/Mono

2. PLII x/Neo:6

3.Dolby EX

4.Theater-Dimensional

4	Use the Up and Down [	]/[	]
	buttons to select an option, and
	use the Left and Right [	]/[	]
	buttons to change it.

The Audio Adjust menu items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

The Audio Adjust settings are explained below.

Multiplex/Mono Settings

Multiplex

■Input Ch

This setting determines which channel of a stereo multi- plex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are out- put.

Mono

■Input Ch

This setting determines which channel is output when the Mono listening mode is used with a stereo source.

Left+Right: Both the left and right channels are output (default).

Left: Only the left channel is output. Right: Only the right channel is output.

PLIIx/Neo:6 Settings

PLIIx Music (2 ch Input)

These settings apply to only 2-channel stereo sources.

If you’re not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx.

■Panorama

With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music listening mode.

On: Panorama function on.

Off: Panorama function off (default).

■Dimension

With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic IIx Music listening mode. It can be adjusted from –3 to +3. The default value is 0. Higher settings move the sound field backward. Lower settings move it forward.

If the stereo image feels too wide, or there’s too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it’s in mono, or there’s not enough surround sound, move it backward.

69