Elation Professional RMD-1220 manual Scene0 1ENTER Scene0 6ENTER, Live, Control menu

Operation Guide

4) Scenes REC

1. Tap UP/DOWN button to scroll to		SCENE REC	MENU
SCENES REC menu.
		Copy
		ESC	ENTER
SCENE REC	MENU	2. Tap >> button to swap sub-menu between
Assign
		Copy and Assign.
ESC	ENTER

3.Tap ENTER button to enter the Sub-menu you selected, and tap UP/DOWN button to scroll scene number. In this mode, there are total 99 scenes, scene71~ scene 99 are build in patterns which can be covered with new scene, you can set default to resume them.

SCENE: [Copy]	MENU	SCENE: [Copy]	MENU
Scene01:ENTER		Scene06:ENTER
ESC	ENTER	ESC	ENTER

Operation Guide

2) LOCAL CONTROL

Local Control menu is to set the output level for the selected dimmers.

LOCAL COTROL00%		MENU
		1. Use MENU button to enter set-up menus.
LIVE 123456789012
		Tap UP/DOWN button to scroll to LOCAL
ESC	ENTER	CONTROL menu.
			LOCAL COTROL00%		MENU
2. Tap ENTER button to enter LOCAL CONTROL
			LIVE 123456789012
menu. The selected channel will keep blinking.
			ESC	ENTER

LOCAL COTROL00%		MENU
LIVE 123456789012		3. You can use >> button move cursor to
		to select the channel you want to adjust.
ESC	ENTER

4.Tap >> button move cursor to blinking "ENTER" and ready to record.

SCENE: [Copy]	MENU
Scene07:ENTER

SCENE: [Copy] Scene06:ENTER

ESC

MENU

ENTER

4. You can use UP/DOWN button to adjust the		LOCAL COTROL03%		MENU
parameter(xx%) for the channel you last		LIVE 123456789012
selected.		ESC	ENTER
LOCAL COTROL03%	MENU
LIVE 123456789012	5.Tap ESC button to exit.

ESC ENTER 5.Tap ENTER button to record input DMX signal

to current Scene. This page Scene number will increase 1 after signal record. For example, the Scene06 increased to Scene07 once Scene06 was recorded the input singal..

ESC ENTER

-12- -9-