Elation Professional RMD-1220 manual CURVESSquare, Curvesno-Dim

Operation Guide

6) CURVES

This menu is used to select a dimmer curve for any or all the dimmer in system. There are 3 dimmer curves available to choice from L-Linear, S-Square and N-NO-DIM.

Overview

Front View

1.	2x16 LCD Display
	Shows the current activities or adjustments of menus.
2.	DMX LED Indicator

1.Tap UP/DOWN button to scroll to CURVES menu.

CURVES(Linear) MENU

CH:

CURVES	MENU
CH:
ESC	ENTER

This LED blinks when DMX signal is present.

3. POWER LED Indicator

This LED will light when power source is connected.

4. ArtNET LED Indicator

		2. Tap ENTER button to enter CURVES
ESC	ENTER	menu. The cursor is blinking on bar 1.
3. You can tap >> button to move cursor from			CURVES(Linear)	MENU
			CH:
bar 1 to bar 12.
			ESC	ENTER

4.Tap UP/DOWN button to select Linear, Square or NO-DIM, and tap ENTER button to save your setup. The LCD page will back to step 1.

CURVES(Square)		MENU	CURVES	MENU
CH:	S		CH:
ESC		ENTER	ESC	ENTER

CURVES(NO-DIM)		MENU
		5. Repeat the step 2~4,you can complete
CH:	N S N
		your setup for Dimmer Curve.
ESC	ENTER	Tap ESC button to jump to previous page and
		the current page will not be recorded.

This LED will blink when an available Ethernet network is connected.

5. MENU Button

This button is used to access set-up menus.

6. >> Button

This button is used to scroll the sub-menus or move the cursor to right.

7.UP(>)/DOWN(>) Button

Tap UP/DOWN button to scroll through or adjust desired levels, menu options during operation.

8.ESC Button

Tap this button to go back the previous menu level or escape without record.

9.ENTER Button

All functions must press ENTER button to activate.

10.ArtNET Port

With RJ 45 standard network port, use to connect your PC.

11. Channel Dimmer Module(x12)

The channel dimmer module is incorporated with a 20A UL approval MCB (Circuit Breaker) and SCRs (Silicon Controlled Rectifier) .

-16- -5-