LCD Projector
Lens Replacement Procedure
Model Number
LNS-T10/LNS-W10
Notes on Lens Replacement
Lens replacement should be performed by the qualified service personnel.
It should be followed by this procedure precisely.
Before an attempt to replace the lens, confirm the model number (both the LCD projector and the lens) and prepare the proper lens. The lens cover is on the lens for protection. Be sure to remove the lens cover before installation.
When installing or removing the lens, be careful not to stain, scratch or damage the lens.
If you have any questions, contact the dealers.
|
| Parts List | ||||
|
| |||||
|
|
|
|
|
|
|
| Following parts are contained in the packing. | |||||
|
|
|
|
|
| |
| ● LENS |
|
| 1 piece | ||
| ● |
|
| 1 piece (Part No. 610 301 5040) |
| |
|
|
|
|
|
|
|
Notes on Lens Replacement
After the lens replacement (before attaching the top cabinet), check the following things.
1.Check the lens is properly installed.
2.Check no wiring is tangled on the gear of the lens motor or other mechanical parts.
3.Check no parts is missing, or no mounting part is lost.
Printed in Japan |