VocoPro CDR-1000 PRO owner manual 11 12 13 14

Controls and Functions cont.

Front Panel Controls and Functions

8 9 10

11 12 13 14 15

8.STOP/CANCEL button - This button is used to STOP disc PLAYBACK. CANCEL recording (When in Record Mode) - Press this button to stop recording.

9.RECORD (**RECORD symbol) button - Press this button to switch the CDR-1000 PRO to Record Mode. Use this button to start a new track while the CDR-1000 PRO is already recording.

NOTE: Recording will not actually start until you press the START button.

10.POWER switch - Use this to turn the power on and off.

11.RECORD LEVEL control - Use this to adjust the volume level that is being recorded onto the disc. NOTE: The record level control only adjusts music that is being input into the CDR-1000 PRO. It will not control the volume of a disc that is being played in the CDR-1000 PRO’s disc player.

12.SOURCE button - Switches between Analog and Digital input mode. Select Analog when using the RCA or XLR audio inputs and Digital when using the Digital (Coaxial) audio input.

NOTE: The analog input does not support 8cm CD-R/RW discs. Use the Digital input on the rear panel of the CDR-1000 PRO when burning to an 8cm CD-R/RW disc and make sure it is in Digital input mode.

13.ERASE button - Use this button to erase data from a CD-Rewritable (CD-RW) disc. NOTE: This function only works on CD-Rewritable (CD-RW) discs and will not work on CD-Rs.

14.FINALIZE button - Use this to finalize a disc. Finalizing a disc enables that disc to be played in any standard disc player. I.e. Car stereo, home stereo. If a disc is not finalized, it can only be played in the CDR-1000 PRO’s disc player.

15.HEADPHONE jack - Plug in your headphones here.

7