Troubleshooting, Problem, Solution | VocoPro CDR-1000 PRO specs

Troubleshooting

Problem

There is no power when the power switch is turned on.

The input source (i.e. disc player, karaoke machine) is playing but there is no sound from the output source (i.e. amp or mixer).

The LED display says “ERROR! FINALIZED DISC”.

The LED display says “ERROR! CDRW DISC ONLY”.

The ﬁnal recording sounds too loud or distorted.

Solution

•Make sure the power cord is ﬁrmly connected to the AC IN terminal on the back of the CDG-1000 PRO.

•Make sure the power cord is securely connected to the power outlet or the surge protector/power strip.

•Make sure your surge protector/power strip is plugged in and turned on.

•Press the record button to switch the CDG-1000 PRO to recording mode. The input audio can only be heard when the CDG-1000 PRO is in recording mode.

•Make sure the audio ins and outs are connected prop- erly.

•If using the Analog RCA inputs be sure the CDR-1000 PRO is in ANALOG mode and if using the DIGITAL input make sure it is in DIGITAL mode.

•If the disc is ﬁnalized, it cannot be recorded on. Put in a blank or non-”Finalized” disc for recording.

•This happens if you try to ERASE a CD-R. The ERASE function only works on CD-Rewritables (CD-RWs).

•The recording volume may have been set too high. Try re-recording and adjust the recording volume so that the bars on the Input Volume meter do not reach the orange bars.

I am unable to record onto an 8cm CD-R/RW disc.

The CD-RW disc will not play in my CD player (Car audio, home audio, etc.)

•Make sure you are connected to the Digital input. The Analog input does not support 8cm discs.

•Most standard CD players (Car audio, home audio, etc.) do not support CD-RW discs. If using CD-RW discs, make sure that your CD player speciﬁes that it is CD-RW compatible.