Bosch Appliances Comprehensive Guide to Bosch C900V2 Dialer Capture Module Installation
Page 4

Conettix C900V2 Installation Guide Contents

1.0 Introduction

The Conettix C900V2 Dialer Capture Ethernet Module (referred to as the C900V2) links the digital dialer (data output) from a control panel to an Ethernet connection on a local area network (LAN) or wide area network (WAN).

When the dialer sends a message, the C900V2 simulates a public switched telephone network (PSTN) connection to the central station. The C900V2 decodes the digital dialer message and sends the decoded signals by Ethernet connection to the Conettix D6600 or D6100i. Communication Gateway/Receiver (referred to as the receiver). When the receiver acknowledges receipt of the message, the C900V2 sends an acknowledge message to the dialer. This process maintains true end-to-end security.

The C900V2 has three modular connectors:

•TELCO connects to the PSTN.

•PANEL connects to a digital dialer.

•Ethernet connects to the network.

In Intercept Mode, the C900V2 connects the digital dialer to a LAN or WAN. In Fallback Mode, the C900V2 connects the dialer to the PSTN, which bypasses the C900V2 from the phone circuit. The C900V2 stays in Intercept Mode when its CPU is working (Output 1 open). In Fallback Mode, the C900V2 connects the dialer directly to the PSTN. The C900V2 switches to Fallback Mode if there is a CPU or network failure.

2.0 Installation

Failure to follow these instructions can result in the system failing to transmit an alarm. Bosch Security Systems, Inc. is not responsible for improperly installed, tested, or maintained devices.

Notify the central station and the local authority before installing the C900V2 in an existing system.

Disconnect all power to the control panel before installing the C900V2.

2.1Mounting

The C900V2 is static sensitive. Before handling the circuit board, touch earth ground to discharge any static electricity from your body. Use a grounding strap while installing the circuit board.

Figure 1: Location of Major Components

 

 

3

 

2

L

H

4

 

 

1

 

 

 

 

8

 

 

5

76

1 – RJ-45 phone jack (to PSTN)

2 – RJ-45 phone jack (to control panel)

3 – High and low voltage selector (refer to Section 3.1 on page 8)

4 – DIP switch (refer to Section 3.2 on page 8)

5 – RJ-45 Ethernet jack (to LAN or WAN)

6 – Power terminal strip (refer to Section 2.5 on page 7)

7 – Input and output wiring terminals (refer to Sections 2.3 and 2.4 on page 7)

8 – Dialer and system LEDs (refer to Section 3.3 on page 10)

2.1.1Optional Mounting Plate

Use an optional mounting plate (P/N: 40182) for mounting the C900V2 on the door of a control panel (D8103) or a fire control panel enclosure (D8109). You cannot use the D8108A Attack Resistant Enclosure.

Mounting a C900V2 in a control panel enclosure is approved by UL only when used with a DS7400Xi as shown in Figure 5 on page 6.

For the following procedure, refer to Figure 2 on page 5.

1.Insert the top hook of the supplied top (1) and bottom plastic standoffs (2) into the mounting plate brackets (3). Refer to Detail A.

2.Align the holes in the mounting brackets (3) and the plastic standoffs (1 and 2).

4

Bosch Security Systems, Inc. 8/08 F01U087780-01

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Conettix C900V2 Trademarks UL Listings and ApprovalsContents Installation IntroductionMounting Optional Mounting PlateAttaching the Module to the Enclosure Door Attaching to Enclosure Door Separate Enclosure MountingWiring Wiring to a DS7400Xi in the Same EnclosurePower Terminal Strip Input FunctionsTelephone Connections Output FunctionsSetup Setting P3Setting the DIP Switches Ethernet Connector PinsDigital Dialer Protocol DIP Switches 1 through 4, DIP Switches Dialer Format of Host Alarm PanelDIP Switches 5 through Switch State FunctionLEDs System LED LEDSystem LED Functions Dialer LED FunctionsColor State Function Color StateDialer Interaction Forcing C900V2 into Fallback Mode Fallback Mode Dialer InteractionCondition Fallback Mode Occurs Intercept Mode Restored C900V2 Configuration Setup Instructions Dynamic Host Configuration Protocol DhcpInitial IP Address Assignment Using ARP.EXE Identifying the MAC Hardware AddressSelect Start Æ Run Using Telnet to Finish the ConfigurationStarting Windows 98SE, ME Telnet Select Start Æ Run Starting Windows 2000/XP Telnet Configuration Using Telnet Netmask AddressHost Bits Netmask Host Netmask BitsPage Anti-Substitution Protection UL Standard 1610 and ULC S304 Intrusion System Installations Panel Telco C900V2 Connection Control Panel Connection Other ConnectionProtected Premises Control Panel with Digital Dialer Backup UL Standard 864 for Fire System Installations Installation at the Protected PremisesPanel Telco C900V2 Connection Control Panel Connection Other Connection OUT1-RSpecifications SpecificationsCompatible Central Station Receiver Formats Appendix C900V2 Compatible Data FormatsCompatible Receiver Formats Radionics SIA Bell Pulse Bosch Security Systems, Inc. F01U087780-01

C900V2 specifications

The Bosch Appliances C900V2 is a remarkable addition to Bosch’s lineup of premium kitchen equipment, designed to cater to modern culinary demands while ensuring user-friendly experience and efficiency. This versatile appliance is aimed at homeowners looking to streamline their cooking process, combining advanced technologies with stylish design.

One of the standout features of the C900V2 is its intuitive touchscreen interface, which allows for seamless navigation through settings and functions. Users can easily customize cooking programs, access recipes, and adjust temperature settings with just a few taps. The interface enhances the cooking experience, making it accessible for both novice and experienced cooks.

The C900V2 offers multiple cooking modes tailored for various culinary styles. From convection baking and broiling to steam cooking, each mode is engineered to deliver precise results. The convection feature ensures even heat distribution, minimizing baking time and ensuring consistent textures and flavors. Steam cooking preserves nutrients and flavors, making it ideal for health-conscious families.

Energy efficiency is another hallmark of the Bosch C900V2. With an Energy Star rating, this appliance is designed to consume less energy without compromising performance. This ensures that users not only save on utility bills but also contribute to a more sustainable environment.

Safety is a priority for Bosch, and the C900V2 includes several features to ensure peace of mind while cooking. The appliance is equipped with child lock settings and automatic shut-off functions, minimizing the risk of accidents. Furthermore, the high-quality materials used in its construction are resistant to heat and stains, ensuring longevity and easy maintenance.

The sleek and modern design of the C900V2 complements any kitchen aesthetic. Available in various finishes, the appliance blends seamlessly with other Bosch products, creating a cohesive look. Its compact size also makes it suitable for smaller kitchens, maximizing space while offering high functionality.

In summary, the Bosch Appliances C900V2 stands out for its intuitive interface, diverse cooking modes, energy-efficient design, safety features, and elegant aesthetics. It is an ideal choice for anyone looking to enhance their culinary experience with a reliable and contemporary appliance that embodies Bosch's commitment to quality and innovation.
Top Page Image Contents