Onkyo HT-S590 instruction manual Troubleshooting

Page 56

Troubleshooting—Continued

On the AV receiver, the subwoofer setting in the speaker configuration is set to No. Set the subwoofer setting to Yes.

There’s no sound with a certain signal format?

Check the digital audio output setting on the con- nected device. On some games consoles, such as those that can play DVDs, the default setting is off.

With some DVD-Video discs, you need to select an audio output format from a menu.

Can’t get 5.1-channel playback?

When speaker B is turned on, speaker set A is reduced to 2.1-channel playback.

The volume cannot be set to 79?

When the subwoofer volume level is set to a positive

(+) value, the maximum master volume level is reduced proportionally.

Noise can be heard?

Using cable ties to bundle audio cables with power cords, speaker cables, and so on may degrade the audio performance, so don’t do it.

An audio cable may be picking up interference. Try repositioning your cables.

The Late Night function doesn’t work?

Make sure the source material is Dolby Digital (page 49).

The DVD analog multichannel input doesn’t work?

Check the DVD analog multichannel input connec- tions (page 27).

To select the DVD analog multichannel input, press the [MULTI CH] input selector button (page 37).

Check the audio output settings on your DVD player.

About DTS signals

When DTS program material ends and the DTS bit- stream stops, the AV receiver remains in DTS listening mode and the DTS indicator remains on. This is to pre- vent noise when you use the pause, fast forward, or fast reverse function on your player. If you switch your player from DTS to PCM, because the AV receiver does not switch formats immediately, you may not hear any sound, in which case you should stop your player for about three seconds, and then resume playback.

With some CD players, you won’t be able to playback DTS material properly even though your player is con- nected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate, or frequency response changed) and the AV receiver doesn’t recog- nize it as a genuine DTS signal. In such cases, you may hear noise.

When playing DTS program material, using the pause, fast forward, or fast reverse function on your player may produce a short audible noise. This is not a mal- function.

Video

There’s no picture?

Make sure that all video connecting plugs are pushed in all the way (page 24).

Make sure that each video component is properly con- nected.

The AV receiver does not convert between formats, so if a video source component is connected to a compo- nent video input, your TV must be connected to the component video output (page 25).

On your TV, make sure that the video input to which the AV receiver is connected is selected.

Tuner

Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesn’t appear?

Relocate your antenna.

Move the AV receiver away from your TV or com- puter.

Listen to the station in mono (page 38).

When listening to an AM station, operating the remote controller may cause noise.

Passing cars and airplanes can cause interference.

Concrete walls weaken radio signals.

If nothing improves the reception, install an outdoor antenna (page 23).

Remote Controller

The remote controller doesn’t work?

Make sure that the batteries are installed with the cor- rect polarity (page 7).

Make sure that the remote controller is not too far away from the AV receiver, and that there’s no obstruction between the remote controller and the AV receiver’s remote control sensor (page 7).

Make sure you’ve selected the correct remote control- ler mode (page 12).

Make sure you’ve entered the correct remote control code.

Can’t control other components?

Make sure you’ve selected the correct remote control- ler mode (page 12).

If you’ve connected an -capable Onkyo MD recorder, CD recorder, or next generation HDD-com- patible component to the TAPE IN/OUT jacks, or a DS-A1 Remote Interactive Dock to the VIDEO 3 IN jacks, for the remote controller to work properly, you must set the Input Display to MD, CDR, or HDD (see page 35).

To control an Onkyo component that’s connected via

, point the remote controller at the AV receiver.

56

Image 56
Contents HT-S590 Important Safety Instructions AvisFCC Information for User PrecautionsPower Speaker Precautions PrecautionsPlacement Using Close to a TV or ComputerFeaturesContents Package Contents Before Using the AV receiver Setting the Voltage Selector on some modelsInstalling the Batteries Using the Remote ControllerFront & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel Voltage Selector only some modelsSpeaker Package RearSpeaker terminals Keyhole slotsReceiver Mode Remote ControllerHow to Use the Remote Controller Remote Controller DVD Mode CD Mode To select your CD player as the input source, pressMD, & CDR Mode CDRHDD Mode To select your HDD component as the input source, pressAlbum +/- button Playlist / buttonsTape Mode Play buttonStop button Reverse Play buttonEnjoying Home Theater Speaker Sets a and BSpeaker Set a Main Room Speaker Set B Sub RoomConnecting Speaker Connecting Your SpeakersSpeaker Connection Precautions Connecting Your Speakers Using Speaker Mounts/BracketsUsing Rubber Stoppers with the Speakers Wall MountingConnecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Other ModelsConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsConnecting a DVD Player Video Connection DVD Player to AV Receiver to TVAudio Connection Multichannel Audio ConnectionVideo Connection VCR to AV Receiver to TV Connecting a VCRConnecting a VCR for Playback Video Connection Connecting a Camcorder, Games Console, or Other DeviceConnecting a VCR for Recording RF OUT Connecting a CD Player or Turntable CD Player or Turntable with Built-in Phono PreampConnecting an HDD-compatible Component Audio Only Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting Onkyo Components Connecting the Power CordAuto Power On/Standby Remote ControlTesting the speakers Turning OnTurning On the AV Receiver Smooth Operation in a Few Easy StepsChanging the Input Display First Time SetupAssigning Digital Inputs to Input Sources Select a suitable listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentDisplaying Source Information Using the Multichannel InputPlaying Your AV Components Using the Tuner Tuning into Radio StationsAM Frequency Step Setup Not North America and Europe Listening to the RadioUsing the Tuner Presetting Radio StationsDeleting Presets Selecting Preset StationsProgram Types Used in Europe PTY Using RDS European models onlyWhat is RDS? Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using Headphones Setting the Display BrightnessAdjusting the Bass & Treble Common FunctionsUsing the Sleep Timer Using the OptiResponse EqualizerCommon Functions Muting the AV ReceiverAdjusting Speaker Levels HeadphonesSpeaker Set B Multichannel DVD InputRecording from Different AV Sources RecordingRecording the Input Source Selecting Listening Modes Using the Listening ModesSurround button remote controller only Using the Listening Modes About the Listening ModesOnkyo Original DSP Modes DTSInput Channel Settings Adjusting the Listening ModesUsing the Audio Adjust Functions Adjusting the Listening Modes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER Plii Music Mode SettingsSpeaker Distance Advanced SetupAdvanced Speaker Settings Advanced Setup Speaker LevelsWhile the Subwoofer setting is Speaker ConfigurationSelected, use the Left and Right Buttons to select Yes orCrossover Frequency Double BassUse the Down button to Use the Left and Right / buttons to selectDigital Input Signal Formats Correcting Sound and Picture SyncTroubleshooting Troubleshooting Sound changes when I connect my head- phones? Can’t record?How do I change the language of a multiplex source? Functions don’t work?Specifications Amplifier SectionVideo Section Tuner SectionSpecifications 1ch Home Theater Speaker PackageOnkyo U.S.A. Corporation Onkyo China Limited
Related manuals
Manual 67 pages 44.82 Kb

HT-S590 specifications

The Onkyo HT-S590 is a comprehensive home theater system designed to deliver outstanding audio performance and enhance the overall viewing experience. With its sleek design and advanced technologies, the HT-S590 stands out as an impressive option for both casual listeners and home cinema enthusiasts.

At the heart of the Onkyo HT-S590 is a powerful 5.1 channel AV receiver that supports a variety of audio formats, including Dolby TrueHD and DTS-HD Master Audio. This allows for the reproduction of high-definition sound that is crisp and rich, giving users the feeling of being part of the action. The system is equipped with a robust 80 watts per channel amplification, ensuring ample power for most home theater setups.

One of the standout features of the HT-S590 is its compatibility with 4K Ultra HD video resolution. This capability ensures that it can seamlessly pass through 4K video signals from compatible sources to your television, providing stunning picture quality coupled with the exceptional sound experience. Additionally, it supports HDR (High Dynamic Range) content, offering improved contrast and vivid colors.

The system also includes integrated Bluetooth connectivity, making it easy to stream music wirelessly from smartphones, tablets, or computers. This feature enhances user convenience, allowing users to enjoy their favorite playlists without the hassle of wired connections.

In terms of speaker configuration, the HT-S590 comes with a set of five satellite speakers and a powerful subwoofer. The compact satellite speakers can be easily mounted on walls or placed on shelves, providing versatility in speaker placement, while the subwoofer delivers deep bass that adds depth to movies, music, and gaming.

The Onkyo HT-S590 is user-friendly, featuring an on-screen display and a remote control that simplifies navigation through its various settings. It also has several HDMI inputs for connecting multiple devices, such as game consoles, Blu-ray players, and streaming devices, streamlining the entertainment hub of your home.

Overall, the Onkyo HT-S590 is an impressive home theater system that combines advanced audio technologies, user-friendly features, and a sleek design, making it an excellent choice for anyone seeking to elevate their home entertainment experience. Its blend of performance and versatility ensures that it can adapt to a variety of viewing and listening preferences, providing unmatched quality for movies, music, and more.