Onkyo HT-S590 Before Using the AV receiver, Setting the Voltage Selector on some models

Page 7

Before Using the AV receiver

Setting the Voltage Selector (on some models)

Some models have a voltage selector switch for compat- ibility with power systems around the world. Before you plug in this model, make sure that the voltage selector is set to the correct voltage for your area. If it isn’t, use a small screwdriver to set it as appropriate. For example, if the voltage in your area is 120 volts, set the selector to “120V.” If it’s between 220 and 240 volts, set it to “220- 240V.”

Notes:

•If the remote controller doesn’t work reliably, try replacing the batteries.

•Don’t mix new and old batteries or different types of batteries.

•If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

•Expired batteries should be removed as soon as possi- ble to prevent damage from leakage or corrosion.

Installing the Batteries

1 To open the battery compartment, press the small hollow and slide open the cover.

2 Insert the two supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment.

3 Slide the cover shut.

Using the Remote Controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

STANDBY indicator

Approx. 16 ft. (5 m)

Notes:

•The remote controller may not work reliably if the AV receiver is subjected to bright light, such as direct sun- light or inverter-type fluorescent lights. Keep this in mind when installing.

•If another remote controller of the same type is used in the same room, or the AV receiver is installed close to equipment that uses infrared rays, the remote control- ler may not work reliably.

•Don’t put anything, such as a book, on the remote con- troller, because the buttons may be pressed inadvert- ently, thereby draining the batteries.

•The remote controller may not work reliably if the AV receiver is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obsta- cle between it and the AV receiver’s remote control sensor.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HT-S590 Avis Important Safety InstructionsPower PrecautionsFCC Information for User Using Close to a TV or Computer Speaker PrecautionsPrecautions PlacementFeaturesContents Package Contents Using the Remote Controller Before Using the AV receiverSetting the Voltage Selector on some models Installing the BatteriesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsVoltage Selector only some models Rear PanelKeyhole slots Speaker PackageRear Speaker terminalsHow to Use the Remote Controller Remote ControllerReceiver Mode Remote Controller DVD Mode To select your CD player as the input source, press CD ModeCDR MD, & CDR ModePlaylist / buttons HDD ModeTo select your HDD component as the input source, press Album +/- buttonReverse Play button Tape ModePlay button Stop buttonSpeaker Set B Sub Room Enjoying Home TheaterSpeaker Sets a and B Speaker Set a Main RoomSpeaker Connection Precautions Connecting Your SpeakersConnecting Speaker Wall Mounting Connecting Your SpeakersUsing Speaker Mounts/Brackets Using Rubber Stoppers with the SpeakersOther Models Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksVideo Connection Formats Connecting Your ComponentsConnecting Both Audio & Video Which Connections Should I Use?Video Connection DVD Player to AV Receiver to TV Connecting a DVD PlayerMultichannel Audio Connection Audio ConnectionConnecting a VCR for Playback Connecting a VCRVideo Connection VCR to AV Receiver to TV Connecting a VCR for Recording Connecting a Camcorder, Games Console, or Other DeviceVideo Connection RF OUT CD Player or Turntable with Built-in Phono Preamp Connecting a CD Player or TurntableConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting an HDD-compatible Component Audio OnlyRemote Control Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbySmooth Operation in a Few Easy Steps Testing the speakersTurning On Turning On the AV ReceiverAssigning Digital Inputs to Input Sources First Time SetupChanging the Input Display Start playback on the source component Select a suitable listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationPlaying Your AV Components Using the Multichannel InputDisplaying Source Information Listening to the Radio Using the TunerTuning into Radio Stations AM Frequency Step Setup Not North America and EuropeSelecting Preset Stations Using the TunerPresetting Radio Stations Deleting PresetsWhat is RDS? Using RDS European models onlyProgram Types Used in Europe PTY Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Common Functions Using HeadphonesSetting the Display Brightness Adjusting the Bass & TrebleMuting the AV Receiver Using the Sleep TimerUsing the OptiResponse Equalizer Common FunctionsMultichannel DVD Input Adjusting Speaker LevelsHeadphones Speaker Set BRecording the Input Source RecordingRecording from Different AV Sources Surround button remote controller only Using the Listening ModesSelecting Listening Modes DTS Using the Listening ModesAbout the Listening Modes Onkyo Original DSP ModesUsing the Audio Adjust Functions Adjusting the Listening ModesInput Channel Settings Plii Music Mode Settings Adjusting the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERAdvanced Speaker Settings Advanced SetupSpeaker Distance Speaker Levels Advanced SetupButtons to select Yes or While the Subwoofer setting isSpeaker Configuration Selected, use the Left and RightUse the Left and Right / buttons to select Crossover FrequencyDouble Bass Use the Down button toCorrecting Sound and Picture Sync Digital Input Signal FormatsTroubleshooting Troubleshooting Functions don’t work? Sound changes when I connect my head- phones?Can’t record? How do I change the language of a multiplex source?Tuner Section SpecificationsAmplifier Section Video Section1ch Home Theater Speaker Package SpecificationsOnkyo China Limited Onkyo U.S.A. Corporation
Related manuals
Manual 67 pages 44.82 Kb

HT-S590 specifications

The Onkyo HT-S590 is a comprehensive home theater system designed to deliver outstanding audio performance and enhance the overall viewing experience. With its sleek design and advanced technologies, the HT-S590 stands out as an impressive option for both casual listeners and home cinema enthusiasts.

At the heart of the Onkyo HT-S590 is a powerful 5.1 channel AV receiver that supports a variety of audio formats, including Dolby TrueHD and DTS-HD Master Audio. This allows for the reproduction of high-definition sound that is crisp and rich, giving users the feeling of being part of the action. The system is equipped with a robust 80 watts per channel amplification, ensuring ample power for most home theater setups.

One of the standout features of the HT-S590 is its compatibility with 4K Ultra HD video resolution. This capability ensures that it can seamlessly pass through 4K video signals from compatible sources to your television, providing stunning picture quality coupled with the exceptional sound experience. Additionally, it supports HDR (High Dynamic Range) content, offering improved contrast and vivid colors.

The system also includes integrated Bluetooth connectivity, making it easy to stream music wirelessly from smartphones, tablets, or computers. This feature enhances user convenience, allowing users to enjoy their favorite playlists without the hassle of wired connections.

In terms of speaker configuration, the HT-S590 comes with a set of five satellite speakers and a powerful subwoofer. The compact satellite speakers can be easily mounted on walls or placed on shelves, providing versatility in speaker placement, while the subwoofer delivers deep bass that adds depth to movies, music, and gaming.

The Onkyo HT-S590 is user-friendly, featuring an on-screen display and a remote control that simplifies navigation through its various settings. It also has several HDMI inputs for connecting multiple devices, such as game consoles, Blu-ray players, and streaming devices, streamlining the entertainment hub of your home.

Overall, the Onkyo HT-S590 is an impressive home theater system that combines advanced audio technologies, user-friendly features, and a sleek design, making it an excellent choice for anyone seeking to elevate their home entertainment experience. Its blend of performance and versatility ensures that it can adapt to a variety of viewing and listening preferences, providing unmatched quality for movies, music, and more.
Top Page Image Contents