Quick Set-up Guide, Connection Examples

Quick Set-up Guide

Connection Examples

AC Power In

(100-240 VAC)

RGB Input

(from DHD Controller RGBHV output to Projector RGBHV)

DVI-I IN

(from the DHD Controller DVI Output to Projector DVI Input)

VX-5000ci Projector

ComLink (from the DHD Controller RJ-11 to Projector RS-232)

			Serial No
Runco International
	Union City, CA
	OUTPUTS		Model
	OUTPUTS
Pr	Y	Pb
R	G	B
			Video Processor / Controller
H	V	H/V	DVI Out

		INPUTS					SYSTEM CONTROL INTERFACE
Pr	Y	Pb	H
R	G	B	H	V
							TRIGGERS
					HD1
						1	2	3	IR
					HD2
R	G	B	H	V
Pr	Y	Pb
			SDI	Pb	Pr	Y	S-Video 1
				Pb	Pr	Y	S-Video 1
	DVI 1	DVI 2	Option		Component Video	Video	S-Video 2	RS-232 Out	RS-232 Control

CAUTION	!
RISK OF ELECTRIC SHOCK
DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE CENTER.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

100-230VAC 50-60 Hz, 165 Watts Max

Made In USA

DHD Controller

While there are many different ways to connect your source equipment to your Controller, the examples shown above are the most common and are recommended by Runco.

•COMPOSITE VIDEO INPUT: Composite video is the most common type of signal used, but is also the lowest in picture qual- ity. Many sources have outputs that are limited to Composite video, such as some VCR’s and camcorders. Others, such as laser disc players, actually produce slightly better results when using Composite video. While the Controller has an excellent

decoder for Composite video, it is recommended that Composite video be used only if necessary.

•S-VIDEO INPUT: S-Video is the second-best type of signal that can be used, but is MUCH better than Composite video. Using such sources as satellite receivers, high-quality VCRs and DVD players (with no Component output) will produce a MUCH cleaner and sharper signal. Decoder artifacts that are associated with Composite video (dot crawl and ‘rainbows’) are non-exis- tent when using S-Video.

•COMPONENT INPUT: Component video is the best type of signal that can be used. The most common sources that use Component outputs are DVD players, and it is highly recommended that Component be used when possible. Component video goes one step beyond S-Video in picture quality; chroma (color) information is more resolved and the overall picture appears more well-defined.

•RGB/COMPONENT PASSTHRU: This port is where all high-resolution signals (such as DTV decoders and progressive DVD players) must be input. The signal type can be either RGBHV or Component and is not processed by the Controller. Computer signals must be input directly to the Projector via the 15-pin VGA connector labeled ‘COMPUTER’.