Preface | www.ti.com |
1 Preface
1.1About This Manual
This user’s guide describes the TS3USB221/A/E Evaluation Module (EVM). This guide contains the EVM schematics, bill of materials, assembly drawings, and top and bottom board layouts.
1.2How to Use This Manual
This document contains the following chapters:
•Chapter 1 – Preface
•Chapter 2 – Introduction and Quick Start
•Chapter 2 – EVM Configuration and Description
•Chapter 3 – Related Documents
1.2.1Information about Cautions and Warnings
ATTENTION
STATIC SENSITIVE DEVICES
HANDLE ONLY AT
STATIC SAFE WORK STATIONS
CAUTION
This EVM contains components that can potentially be damaged by electrostatic discharge. Always transport and store the EVM in its supplied ESD bag when not in use. Handle using an antistatic wristband. Operate on an antistatic work surface. For more information on proper handling, see the Electrostatic Discharge (ESD) application note (SSYA008).
The information in a caution or a warning is provided for your protection. Please read each caution and warning carefully.
1.2.2FCC Warning
This equipment is intended for use in a laboratory test environment only. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his/her own expense will be required to take whatever measures may be required to correct this interference.
2 TS3USB221/A/E High Speed USB 2.0 (480 Mbps) 1:2 Multiplexer/Demultiplexer | SCDU001A |
Switch Evaluation Module | Submit Documentation Feedback |
|
Copyright © 2009, Texas Instruments Incorporated