Onkyo TX-NR929 quick start Performing Wireless LAN Setup

4. Performing Wireless LAN Setup

You can enjoy listening to Internet radio or files on a server (DLNA) through Wi-Fi (Wireless LAN) network. You need to perform the wireless LAN setup to connect the AV receiver to a wireless device such as a wireless router.

5. Playback

BLUETOOTH button and indicator

Wi-Fiindicator

■Previous check for wireless LAN router

There are two types of setting, “Automatic” and “Manual”. If your wireless LAN router has a “WPS button” (*), automatic setup is available. If not, make the setting manually. If the router does not support WPS, take a note of a SSID and b Password (secret key) on the label of the router. Manual setting is available regardless of the “WPS button” on the router.

Rear Panel

90°

180°

90°

180°

1

2

(*)The “WPS button” is a standard of Wi-Fi Alliance. The name of the button may differ depending on the router maker.

When the AV receiver is connected to the network by wireless, adjust the position of the antenna.

1

■Setup procedure

Connect the AV receiver to your TV with HDMI and display the setup screen on the TV. Use a supplied remote controller for the setting. Press RECEIVER before using the remote controller. Use e/r or q/w in the center to select items on the screen, and press ENTER to confirm. Press RETURN to return to the previous screen.

For further information, see “Remote Controller”. (→Page 8)

1 Display “Wireless setup” menu on your TV

●Setup using Initial Setup

Initial Setup function is launched upon first-time use. To perform Initial Setup, move your cursor and click on “Wireless” in “Network Connection”, press ENTER, select “Yes” on the next screen, and press ENTER. (*2)

●Setup not using Initial Setup

This is a setting using Setup Menu (Home Menu). Display “Wireless setup” menu by performing the following procedure which contains five steps.

1.Press Receiver followed by Home on the remote controller.

2.Select “Setup” on the screen, and press ENTER.

3.Select “Hardware Setup”, and press ENTER.

4.Select “Network (*1)”, and press ENTER.

5.Select “Network Connection”, move your cursor and click on “Wireless”, and press ENTER. (*2)

(*1) When “Network” is grayed out, please wait until it becomes operable after the communication is completed.

(*2) The reaction may be slow. Please wait for a short while.

2 Select the setting method, Automatic or Manual. ● Automatic setting

Select “Push Button Confguration (Linksys E/EA Router)” (Connection to Linksys E/EA Router) or “Push Button Confguration (Other Routers)”, and press ENTER for North American models.

Select “Push Button Confguration (Select from Router)” , and press ENTER for excluding North American models.

● Manual setting

Select “Search Wireless Network”, and press ENTER.

1 2 5 4 4

1	Turn on the AV receiver.
2	Select the input source.	5
3	Start playback on the source component.
4	Adjust the volume.
5	Select a listening mode and enjoy!

Playing an Audio from Bluetooth enabled Device

You can enjoy music files on Bluetooth-enabled devices such as smart phones or digital music players wirelessly. (Bluetooth- enabled devices must support A2DP protocol)

■Pairing

•When you play music files on your Bluetooth-enabled device, you need to establish paring only for the first time.

•Look for the following operation procedure of the Bluetooth-enabled device as an input source before establishing pairing. “Procedure to turn the Bluetooth setting ON” “Procedure to connect the Bluetooth-enabled device to other components”.

1 Put the AV receiver to pairing mode

When you press BLUETOOTH on the front panel of the AV receiver, Bluetooth indicator flashes and the AV receiver is

3 Automatic setting

Select “Push Button” (*) and press ENTER. Press “WPS button” on the wireless LAN router, select “OK” on the TV screen, and press ENTER.

(*)If you select “PIN Code”, PIN code setting is available. Use this setting in case WPS button is in the hard location to press, etc. In PIN code setting, register the displayed eight-digit PIN code with the wireless LAN router. For registration, see the instruction manual provided with the wireless LAN router.

Manual setting

Select SSID of your wireless LAN router from the list of SSID displayed on the screen, and press ENTER. Either of the following options is automatically displayed in conjunction with the wireless

router setting.

WEP method

1.Select “Default key ID”, and press

ENTER.

2.Select “1” on the next screen. (If you change WEP key on the router side, select that number.)

3.Select “Password” on the next screen, and press ENTER.

4.Enter the Password (*) by using a key board displayed on the screen, select “OK”, and press ENTER.

5.Select “OK” on the next screen, and press ENTER.

(*)Pressing Shift switches between uppercase and lowercase.

WPA/WPA2 method

1.Select “Password”, and press ENTER.

2.Enter the Password (*) by using a key board displayed on the screen, select “OK”, and press ENTER.

3.Select “OK” on the next screen, and press ENTER.

(*)Pressing Shift switches between uppercase and lowercase.

No encryption

You do not need to set the default key ID nor Password. Select “OK” on the screen, and press ENTER. Select “OK” on the next screen again, and press ENTER.

put to pairing mode.

•When establishing pairing with other Bluetooth-enabled device, press and hold down BLUETOOTH on the AV receiver until the Bluetooth indicator flashes.

The AV receiver can save up to ten pairing information.

2 Connecting to Bluetooth-enabled device

Connect the AV receiver to the Bluetooth-enabled device from a close distance (approx. 1 m) while the indicator on the AV receiver is flashing.

When a model name of the AV receiver is displayed on the screen of Bluetooth-enabled device, select it. After a short while, pairing will be completed.

•When asked for a password on the Bluetooth-enabled device, enter “0000”.

■Enjoying music files by using Bluetooth function

If you connect the AV receiver to your Bluetooth-enabled device with the AV receiver ON, input selector on the AV receiver is automatically switched to Bluetooth position. Play back the music files in this Bluetooth position status.

•It may take 20 seconds or more from turning the AV receiver ON to completing the connection because of the start of Bluetooth function.

•Audio is not output from the AV receiver if audio volume on the Bluetooth-enabled device is set small.

4 Connection

Connection is started, and Wi-Fi indicator flashes on the left of the AV receiver display. When connected successfully, Wi-Fi indicator lights. If the indicator does not light, the connection was not made successfully. Make settings above again. Try the manual setting if the automatic setting does not work.

5 Enjoying Internet radio

Press HOME on the remote controller, select “Network Service” on the next screen. You can enjoy various types of Internet functions. For further information, see “Playback” in the Instruction Manual.

If the settings or operations of Wi-Fi or Bluetooth do not work, see separate volume, “Wi-Fi & Bluetooth Troubleshooting”.

For further information, see “Playback” in the Instruction Manual.

- 5 - - 6 -