C6472 Evaluation Module
1a The EVMC6472 is also shipped
with an
4
2
flashed into NAND. This is a network based application which starts an HTTP server and a TELNET server with the following static IP address: 192.168.2.100. The application enables
1
3
The TMDXEVM6472 (Evaluation Module) kit includes:
TMS320C6472 Evaluation Module (Printed circuit board assembly)
Power supply and power cord
USB Cable for
Software (DVD) and documentation
Ensure EVM | To run | |
configuration switches | ||
demo through | ||
are set as shown. | NAND, configure | |
1 | the switches as | |
1ashown above. |
the following:
User switch 1 OFF - Static IP set as 192.168.2.100 (recommended)
User switch 1 ON - Obtains IP address from DHCP server
In order to connect to the board, the test PC should be configured with static IP address: 192.168.2.101. Once the User LEDs are OFF (indicating successful NAND boot) the user can access the following URL through a browser to view
Connect the USB miniB
2cable to J7 plug for on board embedded emulation, as shown in figure. (For use with CCS debugger only)
Connect Ethernet switch /
3router / PC to the lower Giga Ethernet port (J3) of EVM6472 board using an Ethernet cable to access EMAC0. Use upper Giga Ethernet port of J3 to access EMAC1.
Connect the 12V DC
4power adapter (supplied with the kit) to power jack (J6).
©2009 Texas Instruments Incorporated | eInfochips Literature: EVM6472_QSG_0.2 | ©2009 Texas Instruments Incorporated | eInfochips Literature: EVM6472_QSG_0.2 |