Chapter 1
SLVU286–January 2009
TPS22921/22/22B Load Switch Evaluation Module (EVM)
This user's guide describes the TPS22921/22/22B evaluation module (EVM). This guide contains the EVM schematics, bill of materials, assembly drawings, and top and bottom board layouts.
1.1Introduction
The TPS22921/22/22B EVM is an evaluation module for the Texas Instruments family of low-input voltage,
ultra-low rON load switches. This EVM operates over a 0.9 V to 3.6 V range and provides a continuous output current of up to ≈110 mA. Additional open resistor and capacitor footprints allow for the use of customer-selected input and output load values.
The TPS22921/22/22B EVM accepts a YFP-6 packaged load switch for any of three (3) possible devices: TPS22921, TPS22922, or TPS22922B. These switches have a low threshold enable input, internally
controlled slew rate, and ultra-low quiescent/shutdown current. The TPS22922 and TPS22922B also incorporate a 120-Ωquick output discharge resistor internally.
Table 2-1summarizes the available EVM options.
SLVU286–January 2009 | TPS22921/22/22B Load Switch Evaluation Module (EVM) | 5 |
| | |
