Installing the Code Generation Tools
1.2 Installing the Code Generation Tools
This section helps you install the code generation tools on your
Installing the tools on DOS systems
To install the tools on a DOS system, follow these steps:
1)Insert the TMS470R1x Code Generation Tools
2)Change to the
d:
3)Enter the following command:
install
4) Follow the
If you choose not to have he environment variables set up automatically, you can set yp the environment variables in your autoexec.bat file. See Section 1.3, Setting Up the Code Generation Environment, on page
Installing the tools on Windows 3.1x systems
To install the tools on a Windows 3.1x system, follow these steps:
1)Insert the TMS470R1x Code Generation Tools
2)Start Windows 3.1x.
3)From the File menu, select Run.
4)In a dialog box, enter the following command (where d: is the name of your
d:\setup.exe
5)Click on OK.
6)Follow the
If you choose not to have the environment variables set up automatically, you can set up the environment variables in your autoexec.bat file. See Section 1.3, Setting Up the Code Generation Environment, on page
Setting Up the Code Generation Tools With DOS or Windows 3.1x |