Sharp PG-D40W3D Troubleshooting, Communication cannot be established with the projector

Page 33

Troubleshooting

Communication cannot be established with the projector

When connecting the projector using serial-connection

\Check that the RS-232C terminal of the projector and a computer or the commercially available controller are connected correctly.

\Check that the RS-232C cable is a cross-over cable.

\Check that the RS-232C port setting for the projector corresponds to the setting for the computer or the commercially available controller.

When connecting the projector to a computer using network (LAN)- connection

\Check that the cable's connector is fi rmly inserted in the LAN terminal of the projector.

\Check that the cable is fi rmly inserted into a LAN port for a computer or a network device such as a hub.

\Check that the LAN cable is a Category 5 cable.

\Check that the LAN cable is a cross-over cable when connecting the projector to a computer directly.

\Check that the LAN cable is a straight-through cable when connecting the projector with a network device such as a hub.

\Check that the power supply is turned on for the network device such as a hub between the projector and a computer.

Check the network settings for the computer and the projector

\Check the following network settings for the projector.

•IP Address

Check that the IP address for the projector is not duplicated on the network.

•Subnet Mask

When the gateway setting for the projector is “0.0.0.0” (Not Used), or the gateway setting for the projector and the default gateway setting for the computer are the same:

•The subnet masks for the projector and the computer should be the same.

•The IP address parts shown by the subnet mask for the projector and the computer should be the same.

(Example)

When the IP address is “192.168.150.2” and the subnet mask is “255.255.255.0” for the projector, the IP address for the computer should be “192.168.150.X” (X=3-254) and the subnet mask should be “255.255.255.0”.

•Gateway

When the gateway setting for the projector is “0.0.0.0” (Not Used), or the gateway setting for the projector and the default gateway setting for the computer are the same:

•The subnets for the projector and the computer should be the same.

•The IP address parts shown by the subnet mask for the projector and the computer should be the same.

(Example)

When the IP address is “192.168.150.2” and the subnet mask is “255.255.255.0” for the projector, the IP address for the computer should be “192.168.150.X” (X=3-254) and the subnet mask should be “255.255.255.0”.

Note

•When “DHCP Client” is set to “OFF” on the projector: IP address: 192.168.150.2

Subnet mask: 255.255.255.0

Gateway address: 0.0.0.0 (Not Used)

•For network settings for the projector, refer to page 14.

-33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Setup Manual Sub 15 pin female connector Connecting Pin AssignmentsUSB Terminal Type B USB connector RS-232C Terminal D-sub 9 pin male connectorRS-232C Specifications and Commands Computer control Communication conditionsBasic format W R CommandsDNR Hdmi Input PAL FAO Network settings on the computer Setting up the Projector Network EnvironmentConnecting the Projector to a Computer Setting an IP Address for the Computer Set temporarily as follows Setting up a Network Con- nection for the Projector DNS Controlling the Projector Using Internet Explorer Controlling the Projector via LANVersion 5.0 or later Controlling the Projector Confirming the ProjectorStatus Status ControlSetting the Security Setting and AdjustingProjector Settings & Adjustments Network SecuritySetting for Sending E-mail when an Error Occurs Making General Settings forMail Originator Settings Network Network GeneralAccess URL Mail Recipient SettingsWhen Connecting Using RS-232C Setting up the Projector Using RS-232C or TelnetWhen Connecting Using Telnet Advanced Setup Menu Setup Menu Main MenuView Setting Detail List VView All SettingSet Items Quit without Saving Set Save Settings and QuitSSave & Quit Tings QQuit UnchangedDefault Gateway Setting IP Address SettingSubnet Mask Setting User Name SettingProjector Name Setting Password SettingRS-232C Baud Rate Setting Dhcp Client SettingSetting Auto Logout Time Disconnecting All ConnecData Port Setting Entering AdvancedSetting of Accept IP Ad- dress Carrying out Network Ping TestAccepting All IP Addresses Setting of Search Port Return to Default SettingsReturn to Main Menu Select TCP/IP Winsock Resetting the Lamp Timer of the Projector via LANResetting the Lamp Timer of the Projector via LAN Communication cannot be established with the projector TroubleshootingTroubleshooting \ After the initialization, carry out setting again
Related manuals
Manual 69 pages 21.38 Kb

PG-D40W3D specifications

The Sharp PG-D40W3D is a high-performance 3D projector designed to deliver exceptional visual experiences in both professional and entertainment settings. With its advanced technologies and robust features, the PG-D40W3D stands out as an ideal choice for educators, corporate environments, and event planners looking to create immersive presentations and captivating displays.

One of the key highlights of the Sharp PG-D40W3D is its impressive 4000 ANSI lumens brightness, ensuring clear and vibrant images even in well-lit environments. This high brightness level allows for optimal viewing experiences during daytime presentations or in rooms with ambient light, making it versatile for various applications. Coupled with a high contrast ratio, the projector reproduces deep blacks and bright whites, enhancing the overall image quality.

The PG-D40W3D also incorporates advanced 3D projection capabilities, utilizing DLP technology to create stunning three-dimensional visuals. This makes it an excellent tool for showcasing 3D models, architectural designs, or animated content, providing audiences with an engaging and interactive viewing experience. The ability to switch between 2D and 3D projection modes adds to its flexibility, allowing users to cater to different content types as needed.

With a native resolution of 1280 x 800 pixels (WXGA), the projector delivers sharp and detailed images, making it suitable for detailed presentations, graphs, and charts. The PG-D40W3D supports various input options, including HDMI and VGA, ensuring compatibility with a wide range of devices such as laptops, Blu-ray players, and gaming consoles.

Additionally, the projector features a customizable lens shift and zoom capabilities, allowing users to adjust the image's size and position without compromising on quality. This feature is beneficial in settings where the projector's placement is less than optimal, providing more flexibility in installation.

For ease of use, the PG-D40W3D comes equipped with an intuitive remote control and user-friendly on-screen menus, enabling quick adjustments and efficient navigation. The robust build quality and reliable performance make it a preferred choice for long-term usage, ensuring that it can withstand the rigors of frequent transport and installation.

In conclusion, the Sharp PG-D40W3D is a versatile and powerful 3D projector, ideal for delivering high-quality visual presentations in various environments. Its brightness, resolution, flexibility, and advanced projection technologies position it as a leading choice for professionals seeking to captivate their audience and elevate the quality of their presentations.
Top Page Image Contents