Seiko Group BP-6000 owner manual Nul, ESC ? n m, N16 NUL, N2...n32 NUL

B. Control code summary (FX)

ITEM	SYMBOL	Hexadecimal Decimal			FUNCTION
[27]	ESC 0	[1B,30] H		[27,48] D	Sets line spacing to 1/8".
[28]	ESC 1	[1B,31] H		[27,49] D	Sets line spacing to 7/72".
[29]	ESC 2	[1B,32] H		[27,50] D	Sets line spacing to 1/6".
[30]	ESC 3 n	[1B,33,n] H		[27,51,n] D	Sets line spacing to n/216" (0≤ n≤ 255).
[31]	ESC 4	[1B,34] H		[27,52] D	Sets Italic character mode.
					Download characters and graphic characters
					(B0h-DFh, F4h, and F5h) are not italicized.
[32]	ESC 5	[1B,35] H		[27,53] D	Cancels Italic character mode.
[33]	ESC 6	[1B,36] H		[27,54] D	Enlarges print code area.
					Control code area (80h-9Fh) is printed as characters.
[34]	ESC 7	[1B,37] H		[27,55] D	Clears ESC 6 command.
[35]	ESC 8	[1B,38] H		[27,56] D	Disables paper detect function.
[36]	ESC 9	[1B,39] H		[27,57] D	Enables paper detect function.
[37]	ESC : NUL	[1B,3A,00,n,00] H			Copy RAM download character set from ROM
	n NUL	[27,58,0,n,0] D			character set.
					n=0 : ROMAN is copied.
					n=1 : SANS SERIF is copied.
[38]	ESC <	[1B,3C] H		[27,60] D	Moves print head to home position.
[39]	ESC =	[1B,3D] H		[27,61] D	Sets MSB of data to "0".
[40]	ESC >	[1B,3E] H		[27,62] D	Sets MSB of data to "1".
[41]	ESC ? n m	[1B,3F,n,m] H			Re-assign graphic type for ESC K, ESC L,
		[27,63,n,m] D			ESC Y, and ESC Z commands.
					n : specifies the former graphic type assigned
					by "K", "L", "Y", or "Z".
					m : specifies the new graphic type in table below.
			m	Graphic Type		Number	Maximum	Horizontal
						of Pins	Columns	Density
			0	Standard-density		8	816	60
			1	Double-density		8	1632	120
			2	Double-speed double-density		8	1632	120
			3	Quadruple-density		8	3264	240
			4	80 dpi graphics		8	1088	80
			5	72 dpi graphics		8	979	72
			6	90 dpi graphics		8	1224	90
			7	144 dpi graphics		8	1958	144
[42]	ESC @	[1B,40] H		[27,64] D	Initializes printer.
[43]	ESC A n	[1B,41,n] H		[27,65,n] D	Sets line spacing to n/72" (0≤ n≤ 85).
[44]	ESC B n1 n2...	[1B,42,n1,n2,...n16,00] H			Sets vertical tab positions beginning from n1 and end
	n16 NUL	[27,66,n1,n2,...n16,0] D			with NUL [00]H. n=1 is at the second line from TOF.
[45]	ESC C n	[1B,43,n] H		[27,67,n] D	Sets page length in line unit (1≤ n≤ 127).
					The current print line becomes TOF (top of form).
[46]	ESC C NUL n	[1B,43,00,n] H [27,67,0,n] D			Sets page length in inch unit (1≤ n≤ 22).
					The current print line becomes TOF (top of form).
[47]	ESC D n1	[1B,44,n1,n2,...n32,00] H			Sets horizontal tab position (1≤ n≤ 255).
	n2...n32 NUL	[27,68,n1,n2,...n32,0] D			n indicates the number of spaces from the left margin
					with the character width at the command execution.
					n=1 is at the second column from the left margin.
[48]	ESC E	[1B,45] H		[27,69] D	Sets emphasized character mode.
[49]	ESC F	[1B,46] H		[27,70] D	Cancels emphasized character mode.
[50]	ESC G	[1B,47] H		[27,71] D	Sets double strike character mode.
[51]	ESC H	[1B,48]H [27,72] D			Cancels double strike character mode.

76