NAD L75 owner manual Connecting Audio Equipment

Page 8

CONNECTING AUDIO EQUIPMENT

GB

CAUTION

Do not plug the power cord of any component into AC outlets and do not turn their POWER switches on until all connections have been performed.

The cable connectors should be fully inserted into the jacks. Loose connections may cause hum and noise.

Read the instructions for each component you intend to use with the receiver.

AUDIO SIGNAL JACKS

AUX IN jacks Connect the Auxiliary output jacks to the AUX IN jacks.

TAPE (IN/OUT) jacks

Connect the TAPE jacks to the cassette deck.

Connect the cassette deck output (LINE OUT)jacks to the IN jacks.

Connect the cassette deck output (LINE IN)jacks to the OUT jacks.

White

White

L

L

R R

Red

Red

AUDIO CONNECTION CORDS

To make these connections, use interconnect cords with RCA plugs. Make sure that you connect the white pin-plug to the white jacks (left) and the red pin-plug to the red jacks (right).

CONNECTING THE PRE OUT JACKS

Since subwoofer signals are not amplified, use a subwoofer with a built-in amplifier or connect it to the amplifier connected to this unit.

NOTE

If a speaker is connected directly to the PRE OUT jack without an amplifier connected, no sound comes from the speaker.

CONNECTING THE AC POWER

Be sure to connect the power cord to an AC outlet which supplies the correct voltage.

• Hold the power plug when plugging or unplugging the power cord.

AC OUTLETS (AH VERSION)

CAUTION

Make sure that the total power consumption of all equipment connected to the outlets on the receiver does not exceed 100 watts.

8

Image 8
Contents L75 Important Safety Instructions Important Safety Instructions Important Information for UK Customers If in Doubt Consult a Competent ElectricianContents About the Power SwitchBefore USE Read this Before OperationConnecting Antennas HOW to Connect a Coaxial Cable to the Matching TransformerFM Indoor Antenna FM Outdoor AntennaConnecting Speaker Systems HOW to ConnectAM Indoor Loop Antenna AM Outdoor AntennaConnecting Audio Equipment Connecting Video Equipment Video Signal JacksDolby Digital AC-3/DTS/PCM Digital in Jacks Digital OUT Optical and CoaxialMuting Button on the Remote Control Unit Sleep Timer OperationWhen to USE Reset Switch Audio OperationsAudio Adjustments Basic OperationsRadio Reception Manual Memory Presetting Deleting a Stored PresetRecalling Frequencies BACK-UP Memory FunctionRDS Display CLOCK/ON Time /OFF Time AdjustRDS Radio Data System Available Surround Modes DTS Digital Theater SystemDolby Digital Surround LFE LOW Frequency ExtensionStereo Hall SurroundSpeaker Configuration Speaker PositioningSurround Effects Delay TimeDelay Time Setting OSD on Screen Display OSD on Position System StatusTest Tone PRO Logic OSD on Screen Display Remote Control Unit Using the Remote Control UnitBattery Installation Battery ReplacementTroubleshooting TunerSpecifications NAD Electronics International

L75 specifications

The NAD L75 is an innovative audio component that represents a fusion of modern technology and high-fidelity sound, catering to audiophiles and casual listeners alike. This versatile device embodies NAD's commitment to quality and performance while embracing contemporary connectivity features.

One of the standout features of the L75 is its ability to deliver high-quality sound through a robust amplifier capable of producing 75 watts per channel. This power ensures that the L75 can drive a wide range of speakers, optimizing sound quality regardless of the listening environment. The Class D amplification technology utilized in the L75 not only enhances efficiency but also minimizes distortion, allowing for clearer and more dynamic audio reproduction.

In terms of connectivity, the L75 shines with its multi-source capabilities. It includes built-in Bluetooth, enabling seamless streaming from smartphones, tablets, and computers without the need for cumbersome wiring. This feature caters to the growing demand for wireless audio solutions while maintaining the integrity of sound reproduction. Additionally, the L75 supports a range of digital inputs, including USB and optical, allowing users to connect various devices easily and enhance their listening experience.

The user-friendly interface of the NAD L75 is another notable characteristic. Equipped with a clear, intuitive display and simple navigation, users can easily switch between sources and adjust settings with minimal fuss. It also features an intuitive smartphone app, further enhancing user interaction and enabling control from the palm of one’s hand.

NAD’s commitment to audio excellence is evident in the L75’s advanced digital signal processing (DSP) capabilities, which help to optimize the sound for different rooms and environments. This technology tailors the audio output to compensate for room acoustics, ensuring that listeners experience the best possible sound quality, regardless of their setup.

Furthermore, the aesthetic design of the L75 adds to its appeal. Its sleek, contemporary look complements modern home decor while remaining functional. The combination of high-quality materials and meticulous craftsmanship results in a product not just built for performance but also built to last.

Overall, the NAD L75 is a comprehensive solution for anyone looking to elevate their audio experience. With its potent amplification, multi-source connectivity, user-friendly interface, and smart DSP capabilities, it stands out in the crowded field of audio components, delivering unparalleled performance and versatility.