ENGLISH FRANÇAIS DEUTSCH NEDERLANDS
Introduction
REMOTE CONTROL FUNCTIONS
1
2 |
|
11 | 3 |
7 | 9 |
6 | 10 |
5 | 4 |
| 8 |
ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
1Standby/Power On: Press this button to turn on the C445 Tuner; press it again to turn the unit to standby. Note that the Power Indicator next to the switch will turn green when the unit is on.
2Numeric Keys: These buttons serve as a
3Clear Button: Press this button to clear presets from your station list.
4Info Button: Pressing this button will change the content of the lower display line of the Information Display.
5Auto Tune Button: In DAB mode, press this button to automatically scan all available local stations. To scan for all available stations, keep the button pressed for three seconds, until AUTO SCAN FULL is shown in the Information Display.
6Scroll / Tune Buttons: Press 
to tune lower frequency stations
and 
to tune higher frequency stations. When a station with a strong signal is tuned, the Information Display will read TUNED. Press again briefly to tune to the next frequency increment in Manual tune Mode, or keep pressed for automatic search for the next station with a signal strong enough for acceptable reception in Auto tune Mode. These buttons also control the parameters in the different menus, like the Control Ring on the front panel.
7Preset Buttons: Press 
or 
to select the preset memories for DAB, FM and AM stations stored in the C445 memories.
8Menu/FM Mute Selector: In DAB mode, pressing this button will activate station order, signal error rate, preset tune, software version, Dynamic Rate Control or manual tune features. In FM mode, press this button to select the stereo or mono mode for FM tuning. In the stereo mode, the word STEREO will be shown in the Information Display, and stereo reception will be provided when stations are transmitting stereo signals. In the mono mode, the left and right signals from stereo broadcasts will be mixed together and reproduced through all channels. Select MONO for better reception of weak signals.
9Band Selector: Press this button to change between the DAB, FM and AM frequency bands.
10Select: In FM or AM mode, press this button to select Auto tune, Manual tune or Preset tune.
11Memory Button: Press this button to open the memory position that stores a preset Band Selector location in the tuner. 99 DAB presets can be stored, as well as 30 FM and 30 AM presets.
(See page 12 for more information on tuner Auto Tuning Button and Memory Button sets.)
8
