Sharp AR-M350N/M450N, AR-M350U/M450U service manual Product composition, AR-NC5J

=￿￿?%18'4￿HO￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	CODE : 00ZARM350UA1E
	LASER PRINTER
	AR-M350U/M450U
	MODEL AR-M350N/M450N
	OPTIONS AR-P14

[1] INTRODUCTION

The AR-M350U/M450U and AR-M350N/M450N are minor change models based on the AR-M350/M450.

This service manual only provides information on these minor changes.

In addition to this service manual, the documents listed below are required to properly maintain these machines.

•AR-M350/M450	Service Manual : 00ZARM350/A1E	Parts Guide : 00ZARM450/P1E	Circuit Diagram : 00ZARM350/C1/
•AR-P350/P450	Service Manual : 00ZARP350/A2E	Parts Guide : 00ZAR350LPP1/	Circuit Diagram : 00ZARP350/C1/
•AR-NC5J	Service Manual : 00ZARNC5J/A1E

Note:Depending on the option, additional service documentation may be required.

[2] LIST OF DIFFERENCES FROM AR-M350/M450

A.Product composition

	Model Name	Printer Option Model	NIC Standard Model	Note
Base Engine		AR-M350U	AR-M350N
		AR-M450U	AR-M450N
Print Speed		35ppm	35ppm
		45ppm	45ppm
Multi Function Controller	AR-M11	Not Available	Standard
Multi Function Controller(for U-Model)	Not Available	Standard	Not Available	Not registered as a product
Print Server Card	AR-NC5J	Not Available	Standard
Printer Extension Kit	AR-P14	Option	Not Available	*1

*1: Installation of the AR-P14 on the AR-M350U/M450U will provide similar functionality to that of the AR-M350/M450.

Parts marked with ““ are important for maintaining the safety of the set.

Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

This document has been published to be used for

SHARP CORPORATION after sales service only.

The contents are subject to change without notice.