2.Production number identification
A. Drum cartridge
The lot number, printed on the front side flange, is composed of 10 digits, each digit showing the following content:
3 | 4 | 5 | 6 | 7 | "# | 8 | 9 | 10 |
=?%1057/#$.'2#465HO |
|
| $%&'( | |||||
1Number
For this model, this digit is 2.
2Alphabet
Indicates the model conformity code. T for this model.
3Number
Indicates the end digit of the production year.
4Number or X, Y, Z
Indicates the production month.
X stands for October, Y November, and Z December. 5/6 Number
Indicates the production day on the month.
7Number or X, Y, Z
Indicates the month of packing.
X stands for October, Y November, and Z December. 8/9 Number
Indicates the day of the month of packing.
10Alphabet
Indicates the production factory. "A" for Nara Plant.
B.Toner cartridge
The lot number is composed of 7 digits, and each digit indicates as following.
The lot number shall is printed in the position shown below.
1 | 2 | 3 | 4 | 5 | 6 | 7 |
1Version number (A - sequentially revised)
2Numeral figure
Indicates the end digit of the production year.
3Alphabet
Indicates the production factory. (B for SOCC)
4Destination code
5,6 Numeral figures Indicates the production day.
7Numeral figure or X, Y, Z Indicates the production month.
X stands for October, Y November, and Z December.
Lot No. Location
Lot No. Location
Heat seal
Aluminum bag
C. Developer
The lot number is composed of 8 digit, and each digit indicates as following.
The lot number shall be printed on the bag.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
1Alphabet
Indicates the production factory.
2Figure
Indicates the production year.
3/4 Figure
Indicates the production month.
5/6 Figure
Indicates the production day.
7Hyphenation
8Figure
Indicates the production lot.
3. Environmental conditions
A. Operating conditions
30
85%
85
(%) |
| 35 | 60% | |
Humidity | ||||
|
| |||
20 |
|
|
| |
|
|
|
| |
| 10 Temperature | 35 |
| |
(Without dew condensation)
B. Storage conditions
90
Humidity (%)
20
Temperature | 40 |
(Without dew condensation)