Sharp AR-M257 Addition to the KEY Operator Programs, Disable of FAX Number Direct Entry

ADDITION TO THE KEY OPERATOR PROGRAMS

The following program has been added to the "FAX DEFAULT SETTINGS".

DISABLE OF FAX NUMBER DIRECT ENTRY

When the fax function is enabled, this program is used to prohibit dialing of a destination fax number by direct entry with the numeric keys. To prohibit dialing by direct entry with the numeric keys, touch the checkbox to select it. When this is done, faxes can only be sent to destinations that have been stored, and thus this program can be used to restrict fax destinations and prevent accidental transmission to an incorrect number. The following operations are also prohibited:

•Storing rapid dial keys

•Storing relay groups

•Direct entry of fax numbers when storing a group

•Direct entry of fax numbers when storing programs

•Editing and deleting of stored rapid dial keys

•Editing and deleting of stored relay groups

•Direct entry of fax numbers when editing stored groups

•Direct entry of fax numbers when editing stored programs

•Direct entry of a fax number for received fax forwarding

OTHER CHANGES

If you are using the fax function on the AR-M256/AR-M257/AR-M258/AR-M316/AR-M317/AR-M318/ AR-5625/AR-5631/MX-M260/MX-M310, please make the following substitutions in the Operation Manual (for facsimile).

			When using the fax function on the
page	Changes	Text in the Operation Manual	AR-M256/AR-M257/AR-M258/AR-M316/
		(for facsimile)	AR-M317/AR-M318/AR-5625/AR-5631/
			MX-M260/MX-M310
19	Note	When using job build mode, the	When using job build mode, the
		number of originals scanned will	number of originals scanned will
		appear in the display. When the count	appear in the display.
		reaches 256 pages, it will reset to 0
		and further scanned pages will be
		counted from 1.

2