Sharp AR-157E, AR-153E Using the RSPF/SPF, Original feeder tray, Stream feeding mode

Page 17

Using the RSPF/SPF

The RSPF/SPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighting from 14 lbs. to 23.9 lbs.

Before feeding originals in the original feeder tray, be sure to remove

 

any staples or paper clips from them.

 

Before placing curled or wavy originals into the original feeder tray, be

 

 

sure to flatten them. If not, original misfeeds may result.

 

The RSPF/SPF ( ) indicator on the operation panel will light up. If

 

 

this indicator does not light up, the originals are not properly set or the

 

 

RSPF/SPF is not properly closed.

 

Badly damaged originals may misfeed in the RSPF/SPF. It is

 

 

recommended that such originals be copied from the original table.

3

Special originals such as transparency film should not be fed through

 

the RSPF/SPF, but should be placed directly on the original table.

Image loss (max. 5/32") can occur at the leading and trailing edges of

 

the copies. Also image loss (max. 11/64" in total) can occur along the

 

 

other edges of the copies. It can be 15/64" (max.) at the trailing edge

 

 

of the second copy of two-sided copying.

 

To stop continuous copying using the RSPF/SPF, press the clear

 

 

( ) key.

 

Copying using one-sided to one-sided mode (AR-157E):

 

 

Ensure that no indicator is lit among the original to copy indicators.

 

1

2

3

Make sure that no original is left on the original table.

Adjust the original guides to the size of originals.

Set the originals face up in the

Original face up

original feeder tray.

 

Stream feeding mode

The stream feeding mode allows easy operation of continuous copying from the RSPF/SPF. If the stream feeding mode has been enabled using user program No.4, the RSPF/SPF ( ) indicator will blink approximately 5 seconds after the last original has been fed by the RSPF/SPF. While this indicator is blinking, any new originals placed in the original feeder tray will be fed and copied automatically. If the stream feeding mode has been disabled, the start ( ) key must be pressed each time the originals are set even immediately after completion of a copy run from the RSPF/SPF. The default setting of the stream feeding mode is "ON". See "USER PROGRAMS" (p.23).

15

Image 17
Contents Return to Directory AR-153E AR-157EFor Your Records Do not install your unit in areas that are Important points when selecting an installation siteProper storage for supplies Safety precautionsTrademark acknowledgements Do not touch the photoconductive drum green portionContents Introduction Using the ManualConventions used in the manual AR-153EAR-157EAR-157E AR-153E Part NamesOriginal cover Operation Panel Original to copy key and indicators AR-157EPaper Type of paper Type of media Size Weight FeedingLoading Paper Loading the Paper Tray Gently push the paper tray back into the unit Open the multi-bypass tray and extend the tray Bypass Feed including special paperPress the tray select key to select the multi-bypass tray Copy Flow Select the copy settingsTurn on the unit p.13 Place the original Start copyingAbout the scan head Power onInitial settings of operation panel Power off methods Original PlacementUsing the original table Setting a large original AR-153EOriginal feeder tray Using the RSPF/SPFStream feeding mode SET the Copy Quantity Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment Automatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratioSet the reduction/enlargement ratio To select a zoom ratioPress the tray select key Selecting the TrayTwo sided copying Special FunctionsAbout the Special Functions of AR-157E When copying in the two-sided to two-sided mode When copying in a one-sided to two-sided modeWhen copying in the two-sided to one-sided mode Using the original tableDescription of Special Functions Toner Save ModeUser Programs Displaying Total Number of Copies Program Mode ParametersToner Cartridge Replacement MaintenanceOut while pressing the lock Gently pull the toner cartridgeRelease lever Release leverPage Original table and the back side of the original cover/RSPF Cleaning the UnitCabinet Transfer charger Troubleshooting Troubleshooting the UnitBe sure to use only genuine Sharp parts and supplies Status IndicatorsPaper feed area. p.35 Misfeed RemovalOpen the multi-bypass tray, and side cover, in that order Misfeed in the paper feed area Misfeed in the fusing areaMisfeed in the transport area Lower the fusing unit release leverOpen the front cover Rotate the feeding roller Direction of the arrowMisfeed in the RSPF/SPF Misfeed in the lower paper feed areaAR-157E Developer Required Maintenance RequiredOptional Equipment System ConfigurationPRINTER/SCANNER Expansion KIT AR-PG2 Single Pass Feeder AR-SP5Sheet Paper Feed Unit AR-D16 Software for the Sharp Personal MFP Series Installing the SoftwareMFP driver SharpdeskMFP Driver Button Before InstallationHardware and Software Requirements Operating Interface Reference pages for how to install Flow of installationInstalling onto Windows XP USB/parallel interface Installing the SoftwareButton Manager installer will start Setup program will start to copy the files Begin installation of the printer driver Begin installation of the scanner driverDouble-click the setup icon Installing onto Windows 98/Me/2000 USB interfaceCopying files for MFP driver installation Follow the instructions in the Plug and Play screen that You have completed the installation of the softwareConnect the USB interface cable. p.67 Windows 95/NT Establish the printer settings and click the Next button Connect the parallel interface cable Start indicator Indicators on the Operation PanelOnline indicator Power save indicatorOpening the printer driver from the start menu Using the Printer ModeHow to print About interrupt copying Setting up the Button Manager Using the Scanner ModeUsing the Button Manager SC6 Windows 98/Me/2000Repeat to set ScanMenu SC2 through ScanMenu Flow of the Button Manager setting Scan Button Destination Setting Dialog BoxScanner AR Event Application Application launched Number Using the Scanner key to begin scanningPress the Scanner key Opening the scanner driver and scanning from your computer Using the Sharp TwainPress the start Key Click hereButton Select Sharp Personal MFP Series, and click the SelectScanning with the Scanner and Camera Wizard in Windows XP Scanning begins. When scanning endsSelect a name, format, and folder for the scanned image Select the next task you wish to performContents of the online manual HOW to USE the Online ManualClick To read the online manual Installing Acrobat ReaderUsing Other Installed Drivers Connecting the USB interface cable Connecting the Interface CableInterface cable Parallel interface cableConnecting the parallel interface cable Appendix SpecificationsSingle pass feeder AR-SP5 Printer/Scanner Expansion Kit AR-PG2 Optional equipmentSingle pass feeder AR-SP5 Sheet paper feed unit AR-D16Index MFP driver Index by Purpose Software License Limited Warranty on Media Supplier’s Name and Address Product IdentificationSection Ingredients Hazardous Identification Emergency OverviewSection Precautions for Safe Handling and Use Section Physical Chemical CharacteristicsSection Fire and Explosion Data Section Reactivity DataIngredients CAS No Proportion None required under normal use For users in the USA Sharp Electronics Corporation
Related manuals
Manual 121 pages 53.36 Kb Manual 121 pages 9.52 Kb

AR-157E, AR-153E specifications

The Sharp AR-157E and AR-153E are advanced multifunctional printers (MFPs) designed for small to medium-sized businesses. Both models are engineered with cutting-edge technology and are capable of meeting a variety of office needs, including printing, copying, and scanning, all in one compact device.

One of the main features of the AR-157E and AR-153E is their impressive print speed. The AR-157E can produce up to 15 pages per minute, while the AR-153E achieves an output of up to 13 pages per minute. This efficiency is vital for busy environments, reducing waiting times and enhancing productivity.

Both models are equipped with a user-friendly control panel featuring a large LCD display, which makes navigation intuitive and straightforward. This design allows users to easily access functions and settings without extensive training or experience.

In terms of print quality, the AR-157E and AR-153E deliver exceptional results with a resolution of up to 600 x 600 dpi. This ensures that documents, whether text or graphics, are sharp and professional-looking. The printers also support multiple paper sizes and types, making them versatile for various printing tasks, from standard office documents to marketing materials.

One of the key technologies incorporated into both models is Sharp’s Slow Start technology. This feature minimizes energy consumption during idle periods, contributing to lower operating costs while being environmentally friendly. Additionally, the automatic duplexing capability allows users to print on both sides of the paper, further reducing paper usage and costs.

The security of documents is also a focal point for these models. They provide advanced security features, including user authentication and data encryption, ensuring that sensitive information remains protected.

Both the AR-157E and AR-153E are designed to enhance workplace efficiency. Their compact dimensions make them suitable for offices with limited space, while their robust construction ensures durability and reliability over time.

In summary, the Sharp AR-157E and AR-153E multifunction printers offer a compelling mix of speed, quality, and efficiency. With their advanced technologies, user-friendly features, and emphasis on security, these models stand out as excellent choices for any office environment looking to streamline their document management processes.