MS4200 EN 2/3/04 9:54 AM Page 18
Radio
EN Selecting Tuner Band
1.Press SOURCE on the main unit or TUNER on the remote control to enter Tuner mode.
2.Press BAND / AUTO PROG / CD INFO to select between MW, LW or FM Radio band.
Tips:
Your audio system has 32 preset stations.
Auto Preset Programming (FM only)
Press and hold the BAND / AUTO PROG / CD INFO button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.
Tuning to a Station
Press SKIP BACKWARD 
or SKIP FORWARD
to select frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.
•Press TUNE/PRESET to toggle TUNE and PRESET mode.
•Press PRESET - 
or PRESET + 
on the main system or PRESET FOLDER 
or 
on the remote control to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (FMPR:01 is FM preset 1)
Manually Setting Presets
1.Press the TUNE/PRESET button to enter TUNE mode.
2.Press SKIP BACKWARD 
or SKIP
FORWARD 
to access the desired frequency.
3.Press the PROG/SET button once.
4.The most recently accessed program location will be displayed.
5.If a different program location is preferred, press PRESET - v or + 
to move to the desired preset number
6.Press PROG/SET to store the selected frequency at that preset.
Suppressing Stereo Signal
Press FM ST. to toggle between FM mono and stereo mode. (Remote Only) “ST” is displayed in stereo mode.
13 