NAD T 765 owner manual Analog Audio, Gain, Digital Audio, Press and then, Video

ENGLISH

FRANÇAIS

ESPAÑOL

ITALIANO

DEUTSCH NEDERLANDS SVENSKA

РУССКИЙ

operation

USING THE T 765 – SETUP MENU

Analog Audio

The T 765 has nine analog audio inputs including 7.1 input. These analog inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, Audio Front, Audio MP and 7.1 Input can be variably assigned to each Source.

Scroll to ‘Analog Audio’ and then pressto select and assign an analog audio input to the particular

Source. There are three choices – Audio, 7.1 Input or Off.

When ‘Audio’ is chosen, pressand thenkeys to select and assign the desired audio input – 1 to 6, Front and MP.

Select ‘7.1 Input’ to choose the audio signal fed to ‘7.1 Channel Input.’ If ‘Off’ is selected, no incoming analog audio signal is selected by the particular Source.

Note

An incoming digital signal present at the assigned digital input will always take precedence over the assigned analog audio input, even if both are present. To maintain the analog audio input for the particular Source, select ‘Off’ at the ‘Digital Audio’ setting of the same ‘Source’ menu.

Gain

Gain adjustment allows all sources to play back at the same volume so you don’t need to adjust the volume every time a new source is selected. It is generally preferable to reduce the level of the loudest source rather than making louder the softer sources.

Scroll to ‘Gain’, pressand thento step through the desired level from -12dB to 12dB.

Digital Audio

To take advantage of the T 765’s high performance surround and digital audio circuitry, it is advisable that its Digital Audio inputs are selected.

There are two types of Digital Audio input for the T 765. These are Optical and Coaxial digital inputs. A third option is ‘Off’ whereby no incoming digital audio signal is selected by the particular Source.

The desired digital audio input for a particular Source can be selected by scrolling to ‘Digital Audio’,

press and then	to step through the desired digital input source. After finalizing the desired type
of Digital Audio input, press and then		again to select the specific Digital Audio input.

There are seven Digital Audio inputs selectable for the T 765. They are the following

Optical ➜ Optical 1, Optical 2, Optical 3, Optical Front

Coaxial ➜ Coaxial 1, Coaxial 2, Coaxial 3

Note

An incoming digital signal present at the assigned digital input will always take precedence over the assigned analog audio input, even if both are present. To maintain the analog audio input for the particular Source, select ‘Off’ at the ‘Digital Audio’ setting of the same ‘Source’ menu.

Video

There are four types of video input a particular Source could be assigned. These are HDMI, Component, S-Video and Video inputs. A fifth option is ‘Off’ wherein the particular Source is prompted not to select any Video input.

Navigate through the Video input selections by pressingand thento step through the selections. The following are the assignable Video inputs

HDMI ➜ HDMI 1, HDMI 2, HDMI 3

Component Video ➜ Component 1, Component 2, Component 3

S-Video➜ S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video 5, S-Video Front

Video ➜Video 1, Video 2, Video 3, Video 4, Video 5, Video Front

18